Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB 2x48GB DDR5 4800 CL40 1.1V ECC RDIMM MZ73-LM2

SKU CH-6WYX-EPVPT

A 96GB DDR5 ECC registered server memory kit with two 48GB modules running at 4800MHz CL40 and 1.1V for GIGABYTE MZ73-LM2 motherboards

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

Skatīt vēl 18 konfigurācijas
  • 96 GB kit lets you fully populate the GIGABYTE MZ73-LM2 with matched DDR5 modules
  • Registered ECC RDIMM design offloads the memory controller and corrects single-bit errors for server-grade stability
  • CL40 at 1.1 V delivers DDR5-4800 rated speed with low power draw per module
  • 2Rx8 organisation on 288-pin RDIMM form factor matches the motherboard's population rules exactly
  • Lifetime replacement warranty and free US-based technical support protect the investment long-term

96GB DDR5 ECC RDIMM Kit for Gigabyte MZ73-LM2

This 96GB kit contains two 48GB DDR5 4800 RDIMM modules built for the Gigabyte MZ73-LM2 motherboard. Registered ECC design with 2Rx8 organisation and CL40 latency matches the board's memory controller requirements. Intended for servers and workstations that need registered memory with error correction.

Registered Design with 288-Pin RDIMM Form Factor

The 288-pin registered RDIMM format offloads the memory controller so all slots can run fully populated at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. No heat spreader is fitted, so airflow across the modules must be provided by the chassis.

Replaces Lower-Capacity or Unbuffered Modules

This kit upgrades systems currently limited to smaller registered kits or non-ECC memory that cannot meet data-integrity requirements. The jump is worth it when workloads demand full 96GB capacity with registered buffering and ECC protection. Not for platforms that require UDIMM, SODIMM or non-ECC memory.

Priekšrocības

  • 96 GB kit lets you fully populate the GIGABYTE MZ73-LM2 with matched DDR5 modules
  • Registered ECC RDIMM design offloads the memory controller and corrects single-bit errors for server-grade stability
  • CL40 at 1.1 V delivers DDR5-4800 rated speed with low power draw per module
  • 2Rx8 organisation on 288-pin RDIMM form factor matches the motherboard's population rules exactly
  • Lifetime replacement warranty and free US-based technical support protect the investment long-term

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What DDR5 speed and PC5 rating does this 288-pin RDIMM kit run at?

The kit operates at DDR5 4800 with a PC5-38400 rating, matching the GIGABYTE MZ73-LM2 motherboard specification.

Does this ECC RDIMM kit need a 288-pin registered DIMM slot, and how many slots does it fill?

Yes, it uses 288-pin RDIMM slots and the kit occupies two slots with its 2x48GB modules.

What voltage and CAS latency are set on these modules, and do I need to enable anything in BIOS?

The modules run at 1.1V with CL40 timings; the board should detect them automatically, but verify the population order in the motherboard manual before installing.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.