Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR5 UDIMM modules without heat spreaders, 96GB kit

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM for Supermicro X13SAE-F memory upgrade

SKU CH-1RMN-426Y7

96GB DDR5-5600 kit with two 48GB modules, CL46 timing and 1.1V operation for Supermicro X13SAE-F motherboards

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 96GB 2X48GB

  • 96 GB capacity in a 2 × 48 GB kit doubles your system memory
  • DDR5 5600 speed with CL46 latency delivers rated performance out of the box
  • 10 V operation matches the motherboard's voltage requirement for stable operation
  • 2Rx8 unbuffered UDIMM form factor fits the Supermicro X13SAE-F memory slots exactly
  • Major OEM Samsung Micron Hynix chips tested at rated speed timing and voltage for reliability

Exact-match DDR5 kit for Supermicro X13SAE-F

This 96GB kit delivers two 48GB DDR5 5600 UDIMMs built to the board's native specification. The 2Rx8 non-ECC unbuffered modules arrive at 1.1V and CL46 so the memory controller recognises full capacity at rated speed without manual tuning.

Thermals noise and power draw in normal use

Operating at the standard 1.1V DDR5 voltage the modules draw minimal power and run without a heat spreader. Passive cooling is sufficient for typical desktop workloads and the unbuffered design adds no active components that would generate audible noise.

Upgrade path and when the jump is worth it

The kit replaces lower-capacity DDR5 UDIMMs or fills empty slots on the X13SAE-F when 96GB is required for virtualisation or large datasets. It is not suited for systems that demand ECC registered DIMMs, SODIMM form factor or speeds beyond the board's validated 5600 MT/s limit.

Priekšrocības

  • 96 GB capacity in a 2 × 48 GB kit doubles your system memory
  • DDR5 5600 speed with CL46 latency delivers rated performance out of the box
  • 10 V operation matches the motherboard's voltage requirement for stable operation
  • 2Rx8 unbuffered UDIMM form factor fits the Supermicro X13SAE-F memory slots exactly
  • Major OEM Samsung Micron Hynix chips tested at rated speed timing and voltage for reliability

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the 288-pin DDR5 UDIMM modules in the Supermicro X13SAE-F, and which slot order is often missed?

Insert each 48 GB stick into the DIMM slots specified by the motherboard manual for a two-module population; the common mistake is using the wrong pair of channels, which prevents the 96 GB kit from running at the rated 5600 MT/s.

What maintenance or replacement will the non-ECC unbuffered DDR5 kit need over time?

No scheduled maintenance is required; if a module fails, the lifetime replacement warranty covers a swap, and the absence of a heat spreader means only occasional dust removal from the PCB is practical.

What limit appears first when the 2Rx8 CL46 1.1 V kit runs sustained workloads?

The fixed CAS latency of 46 cycles at 5600 MT/s sets the latency floor, and the 1.1 V operating voltage caps headroom before thermal throttling becomes a factor on these unbuffered modules.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.