Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 5600MHz CL46 2Rx4 1.1V ECC Registered RDIMM Supermicro X14SDW-64C-SP9F memory upgrade

SKU CH-MXP9-EDJ7W

96GB DDR5 5600MHz ECC Registered RDIMM built for the Supermicro X14SDW-64C-SP9F motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Skatīt vēl 4 konfigurācijas
  • 96 GB capacity expands server memory headroom for virtualization and large datasets
  • DDR5 5600 MHz speed delivers high bandwidth for data-intensive workloads
  • Registered ECC design corrects single-bit errors and stabilizes fully populated slots
  • 1 V operation reduces power draw while maintaining rated frequency
  • 288-pin RDIMM form factor matches Supermicro X14SDW-64C-SP9F motherboard requirements

Exact-Match Server Upgrade

This 96GB DDR5 RDIMM is built as a direct replacement for the Supermicro X14SDW-64C-SP9F motherboard. It delivers the precise 2Rx4 registered ECC configuration the board expects so the memory controller recognises the full capacity at its rated 5600MHz speed. System integrators and IT teams can install it without guessing at rank, voltage or timing compatibility.

Build Integration

The module uses the 288-pin DDR5 RDIMM form factor required by this platform, not a UDIMM or SODIMM, so it seats correctly in every supported slot. Registered buffering offloads the memory controller, allowing full population across all channels while ECC corrects single-bit errors on the fly. Buyers who need unbuffered memory or a different pin layout cannot use this kit.

Capacity and Headroom

A single 96GB stick provides substantial headroom for virtualisation hosts, database workloads and memory-intensive analytics running at CL46 latency and 1.1V. The registered architecture keeps every slot stable at maximum density, though total system capacity remains bound by the motherboard's own population limits. Workloads that exceed the board's approved DIMM count will require a different platform.

Priekšrocības

  • 96 GB capacity expands server memory headroom for virtualization and large datasets
  • DDR5 5600 MHz speed delivers high bandwidth for data-intensive workloads
  • Registered ECC design corrects single-bit errors and stabilizes fully populated slots
  • 1 V operation reduces power draw while maintaining rated frequency
  • 288-pin RDIMM form factor matches Supermicro X14SDW-64C-SP9F motherboard requirements

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 96GB DDR5 5600 CL46 kit run at full speed when all slots of the Supermicro X14SDW-64C-SP9F are populated?

The 2Rx4 registered ECC modules are spec-matched to the board's memory controller, so the 96GB kit operates at DDR5 5600 with CL46 timings when installed per the motherboard's population rules.

How much heat does a 96GB DDR5 5600 RDIMM generate under continuous load and does it need active cooling?

The 1.10V registered DDR5 modules have no heat spreader; they rely on chassis airflow and the board's DIMM spacing for passive cooling during sustained operation.

What motherboard and firmware must already be present for this 288-pin RDIMM to be recognised at 96GB?

A Supermicro X14SDW-64C-SP9F motherboard running a BIOS version that supports DDR5 5600 registered ECC DIMMs is required for the kit to initialise at full capacity.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.