Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Six green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM CSE-GS7A-000NBP3 96GB (6x16GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-0WZ1-PAZGM MPN CSE-GS7A-000NBP3

96 GB registered DDR5 kit with six 16 GB ECC modules at 4800 MT/s CL40 for Supermicro SuperWorkstation SYS-751A-I

  • Capacity96GB (6 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96GB kit expands server capacity for heavy workloads
  • DDR5 4800 speed transfers data at PC5-38400 rates
  • ECC registered design corrects errors to protect data integrity
  • 10V operation reduces power draw per module
  • Validated for Supermicro SYS-751A-I and X13DAI-T platforms

System-specific DDR5 kit

This NEMIX RAM kit provides 96GB of DDR5 4800 registered ECC memory across six 16GB modules. It is built for the SuperMicro SuperWorkstation SYS-751A-I and Super X13DAI-T platforms that require registered DIMMs with error correction.

Replaces non-ECC or slower DDR5

The upgrade makes sense when the workload demands data integrity through ECC and the motherboard requires registered modules at 4800MT/s. Systems already running registered DDR5 at the same speed and latency will not see a functional improvement.

Straightforward DIMM installation

The 288-pin modules seat in standard DDR5 RDIMM slots without tools. Populating all six channels per the board manual is essential; mixing ranks or skipping slots often prevents the system from posting.

Priekšrocības

  • 96GB kit expands server capacity for heavy workloads
  • DDR5 4800 speed transfers data at PC5-38400 rates
  • ECC registered design corrects errors to protect data integrity
  • 10V operation reduces power draw per module
  • Validated for Supermicro SYS-751A-I and X13DAI-T platforms

Specifikācijas

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content96GB (6X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Jautājumi par šo preci

What slot type and pin count does the 96 GB DDR5 ECC registered kit require?

Each 16 GB module uses a 288-pin DDR5 RDIMM socket; the kit contains six modules for a total of 96 GB.

Which step is commonly missed when installing the six 1Rx8 modules on a Supermicro X13DAI-T?

Populate all six channels in the order shown in the motherboard manual so each 4800 MT/s registered DIMM initialises at 1.10 V with CL40 timing.

How can I verify long-term reliability of the Samsung, Micron or Hynix chips on these registered DIMMs?

Run a full memory stress test after installation; ECC correction logs will reveal any chip degradation before it affects the 96 GB kit.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.