Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with gold edge contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR4 3200 64GB 2Rx4 CL22 1.2V ECC Registered RDIMM memory upgrade

SKU CH-2N50-8XZZJ

64GB DDR4 3200 registered ECC RDIMM with CL22 latency and 1.2V operation, validated for Supermicro X12QCH+ motherboards

  • Capacity64GB
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 64GB

Skatīt vēl 8 konfigurācijas
  • 64GB capacity enables large datasets in memory
  • DDR4 3200 speed matches server controller specifications
  • Registered ECC architecture prevents silent data corruption
  • 2Rx4 rank and 1.2V voltage align with motherboard requirements
  • 288-pin RDIMM form factor fits Supermicro X12QCH+ motherboard

Exact-Match Server Upgrade

This 64 GB DDR4 3200 Registered ECC RDIMM is built for the Supermicro X12QCH+ motherboard. The 2Rx4 organisation, 1.2 V operation and CL22 timing match the controller's requirements so the module is recognised at full capacity and runs at its rated PC4-25600 speed without manual tuning.

Thermals Power And Noise

Registered buffering reduces electrical load on the memory controller, keeping power draw steady at the specified 1.2 V even with every slot populated. The modules carry no heat spreader, relying on standard server airflow to maintain stable temperatures during continuous operation. Silent solid-state design adds no audible noise to the chassis.

When The Jump Is Worth It

This kit replaces lower-capacity or non-ECC UDIMMs that cannot be recognised in registered-only slots or that leave the system vulnerable to silent data corruption. The upgrade is justified when workloads demand maximum registered DIMM population, error correction and full 3200 MT/s throughput. Buyers needing unbuffered consumer memory or speeds beyond DDR4-3200 should look elsewhere.

Priekšrocības

  • 64GB capacity enables large datasets in memory
  • DDR4 3200 speed matches server controller specifications
  • Registered ECC architecture prevents silent data corruption
  • 2Rx4 rank and 1.2V voltage align with motherboard requirements
  • 288-pin RDIMM form factor fits Supermicro X12QCH+ motherboard

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-924K1
Capacity64GB
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content64GB DDR4 3200MHz PC4-25600 2Rx4 1.2V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install this 288-pin RDIMM on the Supermicro X12QCH+ and which slot order does the manual require?

Power down the server, open the chassis, and insert the module into the DIMM slots in the exact population sequence listed in the Supermicro X12QCH+ manual — typically filling the first slot of each channel before adding a second. The 288-pin keying only fits one way; press straight down until both ejector clips click.

Will the ECC function or the registered buffer need any firmware updates or periodic replacement?

No. ECC error correction and the registered buffer are hardware features of the DRAM and the register chip; they operate automatically and do not require firmware updates or scheduled replacement.

At what point does the CL22 latency become the bottleneck during sustained 3200 MT/s workloads?

CL22 is the rated CAS latency at 3200 MT/s; the memory controller issues reads at that timing continuously, so the latency ceiling is reached whenever the workload saturates the memory bus with random accesses.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.