NEMIX RAM
NEMIX RAM 256GB (8x32GB) DDR4 2400 ECC LRDIMM CL17 1.2V 288-Pin Server Memory
- 256GB (8 x 32GB)
- 288-Pin DDR4 LRDIMM
1 383,99 $
0.01793407BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR4 ECC LRDIMM 192GB (6x32GB) 2400MHz CL17 1.2V 288-Pin Server RAM
A 192 GB DDR4 ECC LRDIMM kit of six 32 GB modules running at 2400 MHz CL17 and 1.20 V for load-reduced server memory capacity
- Capacity192GB (6 x 32GB)
- Type288-Pin DDR4 LRDIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCYes
Capacity 192GB (6 x 32GB)
- 32GB
- 64GB (2 x 32GB)
- 128GB (4 x 32GB)
- 256GB (8 x 32GB)
- 192GB (6 x 32GB)
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
- 192 GB total capacity from six 32 GB modules
- Load-reduced ECC design supports dense server configurations
- DDR4-2400 CL17 timing balances speed and stability
- 2 V operation reduces power draw per module
- 288-pin LRDIMM form factor fits standard server slots
High-capacity server kit
This NEMIX RAM kit delivers 192GB of DDR4 ECC LRDIMM memory across six 32GB modules. It runs at 2400MHz with CL17 latency at 1.2V using the standard 288-pin form factor. The load-reduced design lowers electrical load on the memory controller for dense configurations. It targets IT professionals deploying or upgrading enterprise servers and workstations.
Suited for maximum-density slots
The 4Rx4 organisation and LRDIMM buffering suit platforms that require high capacity per channel and registered ECC memory. Systems needing unbuffered UDIMMs, standard RDIMMs, or non-ECC modules cannot use this kit. Buyers whose motherboards limit rank count or lack LRDIMM support should look elsewhere. The modules have no heat spreaders, so airflow must be managed by the chassis.
Steady throughput under load
Each module is stress tested under sustained load before shipping to verify stability in continuous operation. The 1.2V operating voltage helps contain thermal output during long-running workloads. ECC circuitry corrects single-bit errors in real time to maintain data integrity. Load-reduced buffering keeps signal quality consistent when all six slots are populated.
Priekšrocības
- 192 GB total capacity from six 32 GB modules
- Load-reduced ECC design supports dense server configurations
- DDR4-2400 CL17 timing balances speed and stability
- 2 V operation reduces power draw per module
- 288-pin LRDIMM form factor fits standard server slots
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC LRDIMM Load Reduced Memory |
| Part Number | ML19200-344K6 |
| Capacity | 192GB (6 x 32GB) |
| Type | 288-Pin DDR4 LRDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC LRDIMM Load Reduced Server Motherboard Compatible |
Citas šī modeļa versijas
Vēl 1 šajā sērijā
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Jautājumi par šo preci
Does my server motherboard need 288-pin DDR4 slots that support ECC LRDIMM to use this 192GB kit?
Yes, the kit uses 288-pin DDR4 LRDIMM modules with ECC and load-reduced buffering, so the motherboard must explicitly support DDR4 ECC LRDIMM memory.
Can I mix these 4Rx4 CL17 modules with existing 2Rx4 DDR4 RDIMMs in the same server?
No, LRDIMM and RDIMM technologies cannot be mixed on the same memory channel or system; all slots must use the same registered or load-reduced type.
How do I verify the kit is running at 2400MHz with CL17 timings after installation?
Enter the BIOS or UEFI and check the memory information screen; it should report DDR4-2400 speed, CL17 latency, 1.20V voltage and 192GB total capacity across six modules.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278589BTC
Krājumā
