BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278759BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5 256GB (8×32GB) 6400MHz CL52 1.1V ECC RDIMM Supermicro H14DSG-OD memory upgrade
A 256 GB DDR5 ECC RDIMM kit with eight 32 GB modules at 6400 MHz, CL52, 1.1 V for Supermicro H14DSG-OD servers
- Capacity256GB (8 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB capacity with eight 32 GB modules expands server memory headroom
- DDR5-6400 speed and CL52 latency match the board's rated timing for full throughput
- Registered ECC architecture offloads the controller and corrects single-bit errors automatically
- 10 V operation meets the platform's voltage spec for stable full-population loads
- Exact-fit 288-pin RDIMM kit validated for Supermicro H14DSG-OD motherboard
Exact DDR5 RDIMM kit for Supermicro H14DSG-OD
This NEMIX RAM kit supplies 256 GB across eight 32 GB DDR5-6400 registered ECC modules. Each stick runs at 1.1 V with CL52 timing and a 2Rx8 rank layout that matches the motherboard's memory controller requirements. The 288-pin RDIMM form factor fits the server board's DIMM slots directly.
Suited for fully populated H14DSG-OD servers
Administrators expanding a Supermicro H14DSG-OD to its maximum supported capacity with verified registered ECC memory will find this kit plugs in and runs at rated speed without manual tuning. Builders needing UDIMM, SODIMM or non-ECC modules for other platforms cannot use these registered DIMMs.
Registered ECC with 2Rx8 organisation
The dual-rank registered design offloads the memory controller so all eight slots operate at full DDR5-6400 throughput while ECC corrects single-bit errors in flight. This combination of registration, ECC and 2Rx8 density is the single specification that determines whether the motherboard recognises the full 256 GB at rated performance.
Priekšrocības
- 256 GB capacity with eight 32 GB modules expands server memory headroom
- DDR5-6400 speed and CL52 latency match the board's rated timing for full throughput
- Registered ECC architecture offloads the controller and corrects single-bit errors automatically
- 10 V operation meets the platform's voltage spec for stable full-population loads
- Exact-fit 288-pin RDIMM kit validated for Supermicro H14DSG-OD motherboard
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K8 |
| Capacity | 256GB (8 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 8X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
What motherboard must I already own for this 256GB DDR5 6400MHz CL52 ECC RDIMM kit to be recognised at full capacity?
The kit is spec-matched for the Supermicro H14DSG-OD motherboard; its memory controller expects the exact 2Rx8 rank, 1.10V voltage and CL52 timing so all eight slots populate at the rated 6400MHz speed.
Can I keep my existing DDR5 RDIMMs and add these eight 32GB modules alongside them?
Mixing ranks or capacities breaks the board's population rules; the H14DSG-OD requires identical 2Rx8 Registered DIMMs in every occupied slot, so you must replace any older modules with this full 8×32GB kit.
How do I verify the kit is running at 6400MHz with ECC active after installation?
Enter the BIOS or run a tool such as dmidecode — each DIMM should report 6400MT/s, CL52, 1.10V, Registered ECC and 2Rx8 organisation across all eight slots.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
