NEMIX RAM
NEMIX RAM DDR5 4800 128GB 2x64GB CL40 1.1V ECC Registered RDIMM Supermicro H14SSF memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR5 RDIMM
3 233,99 $
0.0410608BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5 4800 128GB (2x64GB) CL40 1.1V ECC RDIMM Supermicro H14SSL-NT memory upgrade
128 GB DDR5-4800 registered ECC kit (2 × 64 GB, CL40, 1.1 V, 288-pin RDIMM) validated for Supermicro H14SSL-NT motherboards
- Capacity128GB (2 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
Size 128GB 2X64GB
- 128 GB capacity from two 64 GB modules enables dense server memory configurations
- DDR5 4800 speed with CL40 latency delivers rated bandwidth for compatible platforms
- Registered ECC architecture corrects single-bit errors and supports full population stability
- 10 V operation matches the voltage your server memory controller expects
- 288-pin RDIMM form factor fits the Supermicro H14SSL-NT motherboard slots
Exact-match DDR5-4800 upgrade kit
This 128 GB kit contains two 64 GB DDR5-4800 registered ECC RDIMMs built to the voltage, rank and timing the Supermicro H14SSL-NT memory controller expects. The modules are recognised at full capacity and run at their rated speed without manual tuning.
Replaces mismatched or undersized DIMMs
Swapping mixed-capacity or unbuffered sticks for this matched pair removes population-rule conflicts and lets every slot run fully populated at 4800 MT/s. The jump is worth it when the current configuration forces reduced frequency or leaves slots empty because of rank or voltage mismatches.
DDR5 registered ECC constraints
Registered buffering offloads the memory controller so all channels operate at full load, while ECC corrects single-bit errors on the fly. The 1.1 V operating point and CL40 latency are fixed by the DDR5-4800 standard; systems that require lower voltage, different latency or unbuffered DIMMs cannot use this kit.
Priekšrocības
- 128 GB capacity from two 64 GB modules enables dense server memory configurations
- DDR5 4800 speed with CL40 latency delivers rated bandwidth for compatible platforms
- Registered ECC architecture corrects single-bit errors and supports full population stability
- 10 V operation matches the voltage your server memory controller expects
- 288-pin RDIMM form factor fits the Supermicro H14SSL-NT motherboard slots
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 2X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Citas šī modeļa versijas
Vēl 5 šajā sērijā
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
NEMIX RAM
NEMIX RAM MR38400-618K8 128GB (8x16GB) DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H13SSL-N memory upgrade
- 128GB (8 x 16GB)
- 288-Pin DDR5 RDIMM
3 256,99 $
0.04135283BTC
Krājumā
NEMIX RAM
NEMIX RAM MR38400-618K8 128GB 8x16GB DDR5 4800 CL40 1.1V ECC RDIMM memory upgrade
- 128GB (8 x 16GB)
- 288-Pin DDR5 RDIMM
3 268,99 $
0.04150519BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5 4800 128GB 4x32GB ECC Registered RDIMM Supermicro H14SHM memory upgrade
- 128GB (4 x 32GB)
- 288-Pin DDR5 RDIMM
3 273,99 $
0.04156867BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5 4800 128GB (2×64GB) ECC Registered RDIMM 2Rx4 CL40 1.1V Supermicro H14SSL-N memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR5 RDIMM
3 277,99 $
0.04161946BTC
KrājumāJautājumi par šo preci
Does this 288-pin RDIMM kit fit the Supermicro H14SSL-NT motherboard's DDR5 slots?
Yes, the 288-pin DDR5 RDIMM form factor matches the slots on the H14SSL-NT; the kit is spec-matched to the board's population rules.
What is the correct population order when installing both 64GB modules in the H14SSL-NT?
Consult the Supermicro H14SSL-NT manual for the approved DIMM population sequence; installing in the wrong order can prevent the system from recognizing the full 128GB capacity.
Will the ECC and registered features on these modules require any firmware updates or ongoing maintenance?
No firmware updates are needed for the ECC and registered operation; the modules run at 1.1V with CL40 timing and provide error correction for the life of the installation.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00497696BTC
Krājumā
