Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5-4800 384GB (4x96GB) ECC RDIMM CL40 2Rx4 1.1V Supermicro H13DSG-O-CPU-D

SKU CH-6FP0-3GBDT

384 GB DDR5-4800 ECC registered RDIMM kit (4 × 96 GB, CL40, 1.1 V, 2Rx4) validated for Supermicro H13DSG-O-CPU-D motherboards

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Skatīt vēl 30 konfigurācijas
  • 384 GB total capacity for memory-intensive workloads using four 96 GB modules
  • DDR5-4800 speed with CL40 latency matches the board's rated specification
  • Registered ECC design corrects single-bit errors and supports full population stability
  • 1 V operation at 2Rx4 rank aligns with the memory controller's voltage and timing requirements
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D motherboard exactly

Server Memory Kit for Supermicro H13DSG-O-CPU-D

This 384GB kit contains four 96GB DDR5 RDIMM modules built to the exact rank, voltage and timing the Supermicro H13DSG-O-CPU-D memory controller expects. It is intended for administrators who need to populate every slot with registered ECC memory that the firmware will recognise at full capacity and rated speed.

Registered ECC Build and 288-Pin Form Factor

The modules use a registered architecture that buffers address and command signals, allowing all four slots to run fully populated without overloading the memory controller. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. The 288-pin RDIMM form factor matches the motherboard's DIMM sockets; it will not fit UDIMM or SODIMM slots.

DDR5-4800 CL40 1.1V Specification

The kit operates at DDR5-4800 (PC5-38400) with a CAS latency of CL40 at 1.1V, the single specification that determines whether the memory controller will initialise at full frequency and capacity. If your server requires a different speed, voltage or latency profile, this kit will not meet that requirement.

Priekšrocības

  • 384 GB total capacity for memory-intensive workloads using four 96 GB modules
  • DDR5-4800 speed with CL40 latency matches the board's rated specification
  • Registered ECC design corrects single-bit errors and supports full population stability
  • 1 V operation at 2Rx4 rank aligns with the memory controller's voltage and timing requirements
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D motherboard exactly

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What DDR5 speed and PC5 rating does this 384GB kit run at?

The kit operates at DDR5-4800, which corresponds to a PC5-38400 data rate. This is the rated speed the Supermicro H13DSG-O-CPU-D memory controller will recognize when all four 96GB modules are installed.

What physical slot and form factor do these modules require?

Each module is a 288-pin DDR5 RDIMM. The Supermicro H13DSG-O-CPU-D motherboard accepts only registered DIMMs in its DDR5 RDIMM slots; UDIMM or SODIMM modules will not fit or function.

How should the four 96GB RDIMMs be installed, and what step is often missed?

Populate the DIMM slots in the exact order specified in the Supermicro H13DSG-O-CPU-D manual for a four-module configuration. The step most often missed is verifying the approved population sequence before seating the modules.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.