Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM DDR5 4800 CL40 256GB 16x16GB 1Rx8 ECC Registered RDIMM Supermicro H13SSH memory upgrade

SKU CH-VYJS-GH2VY

A 256 GB DDR5 server memory kit of sixteen 16 GB registered ECC RDIMMs running at 4800 MT/s with CL40 latency and 1.1 V, validated for the Supermicro H13SSH motherboard

  • Capacity256GB (16 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity across 16 matched 16 GB modules for full server population
  • DDR5-4800 speed with CL40 timing and 1.1 V operation matching the memory controller spec
  • Registered ECC RDIMM design corrects single-bit errors and offloads the controller for stable full-load operation
  • 288-pin DDR5 form factor verified for the Supermicro H13SSH motherboard population rules
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

256GB DDR5 ECC RDIMM kit for Supermicro H13SSH

This 256GB kit contains sixteen 16GB DDR5 4800 RDIMM modules built to the exact rank, voltage and timing the Supermicro H13SSH memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. It targets administrators who need maximum capacity in a single validated upgrade.

Verify motherboard population rules before ordering

The H13SSH manual defines supported capacities, approved DIMM population order and installation steps that differ by configuration. Only 288-pin Registered DDR5 modules are accepted; UDIMM or SODIMM variants will not fit or function. Confirm your firmware revision matches the board's qualified vendor list so the full 256GB is recognised at boot.

Sustained load stability with registered buffering

Registered buffering offloads the memory controller so all sixteen modules maintain DDR5 4800 throughput continuously without signal degradation. ECC correction operates transparently during extended workloads, preventing silent data corruption that can surface only after hours of full-capacity utilisation. The 1.1V operating voltage keeps power draw predictable across the entire kit.

Priekšrocības

  • 256 GB total capacity across 16 matched 16 GB modules for full server population
  • DDR5-4800 speed with CL40 timing and 1.1 V operation matching the memory controller spec
  • Registered ECC RDIMM design corrects single-bit errors and offloads the controller for stable full-load operation
  • 288-pin DDR5 form factor verified for the Supermicro H13SSH motherboard population rules
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K16
Capacity256GB (16 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 16X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What comes in the box and do I need anything else?

The kit includes sixteen 16 GB DDR5 4800 CL40 1.1 V 288‑pin ECC Registered RDIMM modules, totalling 256 GB. No extra parts or cables are required for installation.

Should I choose this 256 GB kit or a smaller capacity for my Supermicro H13SSH?

This 16 x 16 GB kit fills every slot on the H13SSH and delivers the maximum supported capacity at DDR5‑4800. Select a smaller kit only if your workload does not need the full 256 GB.

What does the DDR5‑4800 CL40 rating mean once the modules are installed?

The memory will run at 4800 MT/s with a CAS latency of 40 cycles at 1.1 V, providing the exact speed and timing the H13SSH memory controller expects for stable, full‑capacity operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.