Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Six green DDR5 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 CL40 96GB 6x16GB ECC Registered RDIMM memory upgrade

SKU CH-50FN-B30AJ

A 96 GB DDR5 server memory kit of six 16 GB registered ECC RDIMMs running at 4800 MHz CL40 and 1.1 V, validated for the Supermicro H13SVW-NT-OS1 motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Skatīt vēl 12 konfigurācijas
  • 96GB capacity across six 16GB modules for high-density server workloads
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth for demanding applications
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors automatically
  • 1V operation matches the platform specification for stable fully-populated performance
  • Verified 288-pin RDIMM fitment for the Supermicro H13SVW-NT-OS1 motherboard

System-specific DDR5 ECC RDIMM kit

This 96 GB kit contains six 16 GB DDR5-4800 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SVW-NT-OS1 motherboard expects. It is designed for administrators who need the full capacity recognised at rated speed without manual tuning.

Registered architecture for full-slot population

The 288-pin RDIMM form factor matches the board's required slot type and population rules, offloading the memory controller so every slot can run fully populated at 1.1 V. It is not compatible with systems that accept only UDIMM or SODIMM modules.

Six-module kit simplifies installation

The matched 6 x 16 GB package eliminates the need to source individual sticks and reduces the risk of mixing ranks or voltages. Buyers who need a different total capacity or a non-ECC configuration should look elsewhere.

Priekšrocības

  • 96GB capacity across six 16GB modules for high-density server workloads
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth for demanding applications
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors automatically
  • 1V operation matches the platform specification for stable fully-populated performance
  • Verified 288-pin RDIMM fitment for the Supermicro H13SVW-NT-OS1 motherboard

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the registered ECC design keep all six slots stable at the rated 4800 MT/s under continuous load?

The registered architecture buffers address and command signals so the memory controller can drive every slot at the specified DDR5 4800 speed without signal degradation during sustained operation.

How much heat does a fully populated 96 GB kit generate when running at 1.10 V all day?

Each 16 GB module operates at 1.10 V with no heat spreader, so total power draw stays low and typical server airflow handles the thermal load without extra cooling.

Will this 288-pin RDIMM kit work in my Supermicro H13SVW-NT-OS1 motherboard without a BIOS update?

The kit is verified for the Supermicro H13SVW-NT-OS1 motherboard; the 288-pin registered form factor and CL40 timing match the board's memory-population rules for immediate recognition.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.