SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00500325BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5-5600 384GB (6x64GB) ECC RDIMM CL46 1.1V Supermicro H13SSH memory upgrade
A 384 GB DDR5 registered ECC kit of six 64 GB modules at 5600 MT/s, CL46, 1.1 V, validated for Supermicro H13SSH motherboards
- Capacity384GB (6 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 384 GB total capacity with six 64 GB modules
- DDR5-5600 speed rated at PC5-44800 for high throughput
- Registered ECC design corrects single-bit errors on the fly
- 10 V operation at CL46 latency matches server spec
- 288-pin RDIMM form factor verified for Supermicro H13SSH
Supermicro H13SSH 384GB DDR5 kit
This NEMIX RAM kit delivers 384GB across six 64GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro H13SSH motherboard. Each module runs at 1.1V with CL46 timing and a 2Rx4 organisation. The registered design is required by the board's memory controller for full-capacity operation.
Sustained-load behaviour
Registered architecture buffers every command so all six slots stay stable at the rated 5600 MT/s during continuous server workloads. On-die ECC corrects single-bit errors in real time, preventing silent data corruption that would otherwise trigger unplanned reboots under heavy utilisation.
Installation notes
The 288-pin RDIMM form factor fits only the H13SSH's DDR5 RDIMM slots; UDIMM or SODIMM modules will not seat. Consult the motherboard manual for the approved population sequence before installing all six modules. No heat spreaders are present, so ensure adequate chassis airflow over the bare PCBs.
Priekšrocības
- 384 GB total capacity with six 64 GB modules
- DDR5-5600 speed rated at PC5-44800 for high throughput
- Registered ECC design corrects single-bit errors on the fly
- 10 V operation at CL46 latency matches server spec
- 288-pin RDIMM form factor verified for Supermicro H13SSH
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K6 |
| Capacity | 384GB (6 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 6X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
How much heat or power draw should I expect from this 384GB DDR5-5600 kit running 24/7 in a Supermicro H13SSH?
Each 64GB module operates at 1.10V with a CL46 timing; the registered design reduces electrical load on the memory controller, so total power scales with the six 2Rx4 DIMMs installed.
What must my Supermicro H13SSH already have for this 6x64GB RDIMM kit to be recognised at full capacity?
The board needs all six 288-pin DDR5 RDIMM slots free and a BIOS that supports 384GB of registered ECC memory populated per the manual's population order.
Will these 5600MHz CL46 modules downclock reliably if I keep older DDR5 DIMMs in the same H13SSH?
The kit is validated for DDR5-5600 at 1.1V; mixing ranks or speeds forces the controller to run every slot at the lowest common speed and voltage.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
