BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.0027802BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5 6400 192GB 12x16GB CL52 1.1V ECC RDIMM Supermicro H13SSW memory upgrade
A 192 GB DDR5 6400 RDIMM kit of twelve 16 GB modules with ECC, registered buffering, CL52 latency and 1.1 V operation, validated for the Supermicro H13SSW motherboard
- Capacity192GB (12 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity from twelve 16 GB modules for maximum memory density
- DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
- Registered ECC RDIMM design corrects single-bit errors and buffers the memory bus
- 1Rx8 rank configuration matches the Supermicro H13SSW memory controller requirements
- 288-pin DDR5 RDIMM form factor fits the motherboard slots exactly
Exact-match DDR5-6400 kit
This 192GB kit contains twelve 16GB DDR5 RDIMM modules rated at 6400MHz with CL52 latency and 1.10V operation. Each module uses a 1Rx8 registered ECC design built with major OEM chips.
Suits Supermicro H13SSW builds
The 288-pin registered form factor matches the H13SSW memory slots and population rules for full-capacity operation. Buyers who need unbuffered UDIMMs or SODIMMs for a different platform should look elsewhere.
Twelve-module kit only
The package delivers exactly twelve 16GB RDIMMs with no extra cables, software or heat spreaders. Installation follows the motherboard manual population order for the H13SSW.
Priekšrocības
- 192 GB total capacity from twelve 16 GB modules for maximum memory density
- DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
- Registered ECC RDIMM design corrects single-bit errors and buffers the memory bus
- 1Rx8 rank configuration matches the Supermicro H13SSW memory controller requirements
- 288-pin DDR5 RDIMM form factor fits the motherboard slots exactly
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K12 |
| Capacity | 192GB (12 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 12X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
Do I need a Supermicro H13SSW motherboard with 12 free DDR5 RDIMM slots to install this 192GB kit?
Yes, the kit is built for the Supermicro H13SSW and requires twelve 288-pin DDR5 RDIMM slots to run the full 192GB at DDR5-6400.
Can I mix these 1Rx8 CL52 1.1V modules with older DDR5 RDIMMs that have different ranks or timings?
Mixing different ranks, latencies or voltages is not recommended; the memory controller will downclock to the slowest module and may disable ECC or registered features.
How do I confirm the kit is running at 6400 MT/s with ECC active after installation?
Enter the BIOS or use a tool like dmidecode to verify each DIMM shows 6400 MT/s, CL52, 1.1V and ECC Registered status across all twelve slots.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
