SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00503986BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5 6400 256GB (2×128GB) ECC RDIMM CL52 1.1V 2Rx4 Supermicro H14SHM
256 GB kit of two 128 GB DDR5-6400 ECC registered DIMMs with CL52 timing and 1.1 V operation, validated for Supermicro H14SHM motherboards
- Capacity256GB (2 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB total capacity in a matched 2×128 GB kit
- DDR5-6400 speed with CL52 latency runs at rated frequency
- Registered ECC design corrects single-bit errors for data integrity
- 10 V operation reduces power draw per module
- Validated for Supermicro H14SHM motherboard with 288-pin RDIMM form factor
Exact-Match Server Upgrade
This 256GB kit delivers two 128GB DDR5-6400 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H14SHM memory controller expects. The modules operate at 1.10V with CL52 latency so the system recognises full capacity and runs at rated speed without manual tuning.
288-Pin Registered ECC Architecture
Registered buffering offloads the memory controller, allowing every populated slot to run at full capacity while on-die ECC corrects single-bit errors before they reach production workloads. The 2Rx4 organisation and 288-pin RDIMM form factor match the board's population rules, so no UDIMM or SODIMM alternatives will fit.
Sustained Enterprise Stability
ECC protection and registered signalling maintain data integrity across continuous, fully-populated operation rather than brief benchmark bursts. Major OEM Samsung, Micron or Hynix DRAM ensures consistent thermal and electrical behaviour under long-running server loads.
Priekšrocības
- 256 GB total capacity in a matched 2×128 GB kit
- DDR5-6400 speed with CL52 latency runs at rated frequency
- Registered ECC design corrects single-bit errors for data integrity
- 10 V operation reduces power draw per module
- Validated for Supermicro H14SHM motherboard with 288-pin RDIMM form factor
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
Does the 1.1V operating voltage limit sustained throughput on the Supermicro H14SHM?
The kit runs at the standard DDR5 1.10V, which is the voltage the Supermicro H14SHM memory controller expects for DDR5-6400 operation.
How much heat do the 128GB RDIMMs produce when the server runs all day?
The modules have no heat spreader and operate at 1.10V; registered ECC RDIMMs at this voltage typically stay within normal server airflow limits without extra cooling.
Must the Supermicro H14SHM already have a specific BIOS version to recognise the 2Rx4 256GB kit?
The kit is spec-matched to the H14SHM's 288-pin RDIMM slots and DDR5-6400 registered ECC requirements; consult the motherboard manual for any BIOS update guidance before installing.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
