BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278077BTC
Krājumā
NEMIX RAM
NEMIX RAM MD25600-818K4 32GB (4x8GB) DDR4 3200 CL22 1.2V 288-pin UDIMM memory upgrade
32GB DDR4 3200 kit of four 8GB unbuffered UDIMMs at CL22 and 1.2V for compatible ASUS motherboards
- Capacity32GB (4 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity across four 8 GB modules for multitasking headroom
- DDR4 3200 speed rated at PC4-25600 for responsive data throughput
- Low 1.20 V operation reduces system power draw
- CL22 latency timing supports stable operation at rated frequency
- 288-pin UDIMM form factor fits standard desktop DIMM slots
32 GB DDR4 kit for ASUS gaming boards
This NEMIX RAM kit supplies 32 GB across four 8 GB DDR4 3200 UDIMM modules. It targets owners of compatible ASUS gaming motherboards who want a straightforward capacity increase. The unbuffered, non-ECC design matches standard desktop requirements and the CL22 latency at 1.20 V fits stock JEDEC operation. Builders seeking a simple drop-in upgrade for supported platforms will find the specifications aligned with typical consumer DDR4 slots.
Matched quad-channel kit simplifies installation
The package contains four identical 1Rx8 modules tested together, so the board can populate all four slots with a single part number. This removes the guesswork of mixing sticks and helps the memory controller initialise at the rated 3200 MT/s speed. No heat spreaders are fitted, keeping the modules low-profile for tight CPU cooler clearances. The kit ships ready to install without additional software or firmware steps.
Verify four-slot support and DDR4-only platform
Before ordering, confirm your ASUS motherboard has four DDR4 UDIMM slots and accepts 3200 MT/s unbuffered memory at CL22. Systems limited to two slots or requiring registered ECC modules cannot use this kit. DDR5-only platforms are physically incompatible with the 288-pin DDR4 form factor. Check the board manual for maximum per-slot capacity and qualified vendor lists to ensure the 8 GB density is supported.
Priekšrocības
- 32 GB capacity across four 8 GB modules for multitasking headroom
- DDR4 3200 speed rated at PC4-25600 for responsive data throughput
- Low 1.20 V operation reduces system power draw
- CL22 latency timing supports stable operation at rated frequency
- 288-pin UDIMM form factor fits standard desktop DIMM slots
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Gaming Motherboard Compatible Series Memory |
| Model | ASUS DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASUS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (4X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Jautājumi par šo preci
Does the MD25600-818K4 kit need any firmware updates or thermal-pad replacements during its service life?
No firmware or thermal-pad maintenance is required; the modules have no heat spreader and run at standard 1.20 V, so they operate without user-serviceable parts.
What limits sustained throughput first — the CL22 latency or the DDR4 3200 bus?
The DDR4 3200 (PC4-25600) bus bandwidth is the first ceiling; CL22 timing adds latency but does not cap maximum sustained transfer rate.
How much heat and power does the 4×8 GB kit produce when running all day at 3200 MT/s?
Each 1Rx8 module draws 1.2 V with no heat spreader, so total power stays low and heat output is minimal under continuous load.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
