Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green DDR5 UDIMM modules without heat spreaders in a kit box

NEMIX RAM

NEMIX RAM ME44800-4828K4 192GB 4X48GB DDR5 5600 ECC UDIMM Supermicro X14SAE memory upgrade

SKU CH-24WJ-M5ZW3

192 GB kit of four 48 GB DDR5-5600 ECC unbuffered UDIMMs validated for Supermicro X14SAE motherboards

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

  • 192 GB capacity with four 48 GB modules for high-density workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC error correction detects and corrects single-bit faults on the fly
  • 2Rx8 unbuffered UDIMM at 1.1 V matches Supermicro X14SAE memory controller specs
  • CL46 CAS latency and 288-pin form factor ensure correct timing and physical fit

Exact-match DDR5 ECC upgrade for Supermicro X14SAE

This 192GB kit delivers four 48GB DDR5-5600 UDIMMs built to the board's exact rank, voltage and timing requirements. The modules are unbuffered ECC with a 2Rx8 organization and CL46 latency at 1.1V. They install directly into the 288-pin slots and are recognised at full capacity and rated speed without manual tuning.

ECC protection and verified fitment

On-die error correction detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots. The kit is validated for the Supermicro X14SAE motherboard's DDR5-5600 ECC specification, so the required UDIMM form factor and population rules are already satisfied. No RDIMM or SODIMM alternatives are needed.

Straightforward installation with one key check

Installation follows standard UDIMM procedure: power down, align the notch, press until the latches click, then power on. The critical step is consulting the motherboard manual for the approved DIMM population order and maximum supported capacity per slot before fitting all four modules. Skipping that check is the most common cause of a no-post or reduced-capacity result.

Priekšrocības

  • 192 GB capacity with four 48 GB modules for high-density workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC error correction detects and corrects single-bit faults on the fly
  • 2Rx8 unbuffered UDIMM at 1.1 V matches Supermicro X14SAE memory controller specs
  • CL46 CAS latency and 288-pin form factor ensure correct timing and physical fit

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How long before the DDR5 ECC UDIMM modules need replacement?

The kit uses major OEM Samsung, Micron or Hynix chips rated for continuous operation at 1.10 V and CL46; no scheduled replacement interval is defined for server-grade DDR5 memory.

What limit appears first when the 192 GB kit runs at 5600 MT/s all day?

The memory controller on the Supermicro X14SAE board will reach its maximum supported bandwidth and rank population before the modules hit thermal or voltage limits at 1.10 V.

How much heat and noise do the four 48 GB sticks produce under sustained load?

The modules have no heat spreader and run at standard 1.10 V DDR5 voltage, so they add minimal heat and zero acoustic noise; system airflow handles cooling.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.