Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM MR44800-328K8 256GB 8x32GB DDR5 5600MHz CL46 ECC Registered RDIMM memory upgrade

SKU CH-R4XH-A8JXW

Eight 32 GB DDR5 RDIMMs deliver 256 GB of registered ECC memory at 5600 MHz CL46 for Supermicro H13DSG-OM servers

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from eight 32 GB modules
  • DDR5-5600 speed rated at PC5-44800 for server workloads
  • CL46 CAS latency and 1.1 V operation match controller expectations
  • Registered ECC RDIMM design corrects single-bit errors and supports full population
  • Verified fit for Supermicro H13DSG-OM motherboard with 288-pin form factor

Capacity and kit layout

This 256GB kit contains eight 32GB DDR5 5600MHz CL46 registered ECC RDIMMs. It is built for the Supermicro H13DSG-OM motherboard and targets administrators who need the exact rank, voltage and timing that the board's memory controller expects.

Upgrade path and fitment

The modules replace any slower or lower-capacity DDR5 RDIMMs currently installed in the H13DSG-OM. The jump is worthwhile when the server must run fully populated at 5600MHz without down-clocking or when ECC protection is required for production workloads.

Workload headroom and limits

Eight dual-rank 32GB modules at 1.10V deliver the maximum supported capacity for this platform while maintaining registered stability. Headroom ends at the board's 288-pin slot count and its qualified DDR5-5600 speed; configurations needing faster memory or different form factors are not served by this kit.

Priekšrocības

  • 256 GB total capacity from eight 32 GB modules
  • DDR5-5600 speed rated at PC5-44800 for server workloads
  • CL46 CAS latency and 1.1 V operation match controller expectations
  • Registered ECC RDIMM design corrects single-bit errors and supports full population
  • Verified fit for Supermicro H13DSG-OM motherboard with 288-pin form factor

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will these 288-pin DDR5 RDIMM modules fit the memory slots on my Supermicro H13DSG-OM motherboard?

Yes, the 288-pin Registered DDR5 form factor matches the slots on the Supermicro H13DSG-OM, and the kit is verified for that specific board.

What is the correct installation sequence for the eight 32 GB modules to avoid a no-post condition?

Populate the DIMM slots in the exact order listed in the Supermicro H13DSG-OM manual; skipping a required slot or mixing ranks will prevent the system from booting.

How can I tell if one of the 2Rx8 modules has degraded and needs replacement?

The registered ECC design logs corrected single-bit errors in the system event log; a rising correctable-error count on a specific DIMM signals it should be swapped out.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.