Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Noctua
Fanless heatsink cools compatible CPUs silently through natural convection in suitable cases
The Noctua NH-P1 is a passive CPU cooler designed for 100% silent operation through natural convection. It targets builders who want zero fan noise and reduced dust accumulation in compatible enclosures. The six heatpipes and widely spaced fins provide the mass and low airflow resistance needed for fanless cooling. It suits CPUs with low to moderate heat dissipation such as Intel 285K, 265K, 245K or AMD Ryzen 7900, 7700, 7600.
This cooler replaces traditional tower coolers that rely on attached fans for heat dissipation. The jump is worth it when the build prioritises absolute silence over maximum thermal headroom and the case appears on Noctua's recommended list for natural convection. It also works in semi-passive setups with an optional NF-A12x25 LS-PWM 120mm fan that only spins up when necessary. Builders needing to cool high-TDP processors under sustained loads should stay with active cooling.
Installation uses the professional Torx-based SecuFirm2+ mounting kit supplied for Intel LGA1851, LGA1700, LGA1200, LGA115x and AMD AM5, AM4 sockets. The design guarantees 100% RAM compatibility on AM4 and LGA1700/1200 platforms and clears the top PCIe slot on most ATX and µATX motherboards. NT-H2 thermal compound is included for optimal contact. The 158 mm height and 1185g weight require a case with sufficient clearance and a motherboard with adequate mounting reinforcement.
| Brand | Noctua |
|---|---|
| Type | Heatsinks only |
| CPU Socket Compatibility | Intel LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2011, LGA2066 and AMD AM5, AM4 |
| Fan Mounting Types to Heatsink | Vertical |
| Max CPU Cooler Height | 158 mm |
| Weight | 1185g |
The cooler stands 158 mm tall, so your chassis must provide at least that much clearance between the CPU socket and the side panel.
Use the SecuFirm2+ kit labelled for Intel LGA1700 and tighten the Torx screws in a cross pattern until the springs are fully compressed.
Reapply NT-H2 whenever you remove the cooler or after several years if temperatures rise noticeably.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?