Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black mid-tower ATX case with tempered glass front panel showing three RGB fans

NZXT

NZXT CM-H71EB-01 H7 Elite ATX Mid Tower PC Case Black

SKU CH-AJN3-BV1QY MPN CM-H71EB-01

A mid-tower case with a tempered glass front panel, three pre-installed 140mm RGB fans, a built-in RGB and fan controller, and top-mounted USB 3.2 Type-A and Type-C ports

  • TypeATX Mid Tower
  • ColorBlack
  • Tempered glass front panel showcases three pre-installed 140mm RGB fans
  • Perforated top panel supports radiators up to 360mm for liquid cooling
  • Tool-less access to front and side panels simplifies the build process
  • Built-in RGB and fan controller V2 manages lighting and speeds via CAM
  • Top-mounted USB 3.2 Type-A and Type-C ports provide fast connectivity

Premium mid-tower for RGB-focused builds

The NZXT H7 Elite is a black ATX mid-tower case designed for enthusiasts who want a luminous showcase for premium components. A tempered glass front panel puts three pre-installed 140mm F Series RGB fans on full display. The chassis combines a large form factor with improved airflow to support high-performance hardware.

Pre-installed cooling and integrated control

Four 140mm fans come fitted as standard: three F Series RGB units and one F Series Quiet Airflow fan. A built-in RGB and Fan Controller V2 connects to NZXT CAM software for unified lighting and speed management. Two top-mounted USB 3.2 Type-A ports and one USB 3.2 Type-C port provide front-panel connectivity.

Tool-less access with radiator clearance

Front and side panels remove without tools, while widened cable channels, hooks and straps simplify routing. Front and top mounts accept radiators up to 360mm for custom liquid cooling. Vertical GPU mounting is supported with a separate bracket. Builders needing a smaller footprint or fewer pre-installed fans should consider other models.

Priekšrocības

  • Tempered glass front panel showcases three pre-installed 140mm RGB fans
  • Perforated top panel supports radiators up to 360mm for liquid cooling
  • Tool-less access to front and side panels simplifies the build process
  • Built-in RGB and fan controller V2 manages lighting and speeds via CAM
  • Top-mounted USB 3.2 Type-A and Type-C ports provide fast connectivity

Specifikācijas

BrandNZXT
Part NumberCM-H71EB-01
TypeATX Mid Tower
ColorBlack
Sūtījuma svars13.95 kg
Sūtījuma izmēri572 × 572 × 309 mm

Jautājumi par šo preci

Will the pre-installed 140mm F Series RGB fans need replacing after extended use?

The case includes three pre-installed 140mm F Series RGB fans and one 140mm F Series Quiet Airflow fan; all are standard 140mm units that can be swapped individually if a bearing wears out or RGB output degrades.

What thermal limit appears first when the system runs heavy loads for hours?

With a perforated top panel and front glass, the primary limit is the airflow balance between intake through the top and exhaust through the rear; a 360mm radiator mounted at the top or front can move more heat than the stock fan array alone.

How loud and hot does the case get when the built-in RGB & Fan Controller V2 runs all fans at maximum all day?

The controller manages four 140mm fans via NZXT CAM; at full speed the fans move significant air through the perforated top and tempered glass front, raising case temperature modestly while fan noise becomes clearly audible in a quiet room.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.