Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Frameless 7010 fan, two-tone finish, four-pin connector

OEM Industries

OEM Industries FD7010H12S 12V .35A 4-pin frameless fan

SKU CH-XXZM-AQRRT

A frameless 12 V 0.35 A sleeve-bearing fan with a 4-pin connector for graphics-card cooling

  • Color2-Tone
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector4 Pin
  • LEDNo
  • Frameless design saves space inside compact builds
  • 12 V .35 A power draw keeps energy use low
  • 4-pin connector enables precise speed control
  • Sleeve bearing provides quiet operation at low RPM
  • Targeted compatibility with HD 7850 graphics cards

Frameless GPU cooler fan

The OEM Industries FD7010H12S is a frameless replacement fan built for the HD7850 graphics card. It draws 12V at .35A and uses a 4-pin connector for PWM speed control. The sleeve bearing keeps the unit simple and compact. It is intended for repair technicians or owners restoring a specific legacy cooler.

4-pin frameless mounting

Without a traditional frame the fan sits directly against the heatsink shroud, so the original mounting holes must line up exactly with the FD7010H12S pattern. The 4-pin wire harness plugs straight into the card’s header, enabling automatic fan curves. No LED lighting is present, keeping the install clean for a pure repair job. Build quality matches the original OEM sleeve-bearing specification.

Direct HD7850 cooler swap

This unit replaces a worn or noisy stock fan on the HD7850 reference cooler without modifying the heatsink. The jump is worth it when the original bearing rattles or speed control has failed. It is not suited for custom-loop builders who need a standard 70 mm frame, nor for owners of other GPUs with different mounting pitches or voltage requirements.

Priekšrocības

  • Frameless design saves space inside compact builds
  • 12 V .35 A power draw keeps energy use low
  • 4-pin connector enables precise speed control
  • Sleeve bearing provides quiet operation at low RPM
  • Targeted compatibility with HD 7850 graphics cards

Specifikācijas

ModelFD7010H12S
Color2-Tone
TypeFan only
Bearing TypeSleeve Bearing
Power Connector4 Pin
LEDNo

Jautājumi par šo preci

What does the 4-pin connector on the FD7010H12S control?

The 4-pin connector supplies 12 V at .35 A and carries a PWM signal so the graphics card can vary the fan speed automatically.

What physical space does the frameless FD7010H12S need to fit an HD7850 cooler?

The frameless design mounts directly onto the HD7850 heatsink using the card's original screw holes, so no extra bracket or frame clearance is required.

Which way do the four wires go when plugging the FD7010H12S into the HD7850 header?

Align the keyed 4-pin plug with the notch on the graphics card header; forcing it backwards bends pins and prevents the PWM signal from working.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.