Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 40mm square Maglev cooling fan 12V 2.8W 3-pin

OEM Industries

OEM Industries GM1204PQV1-8A 40mm Maglev Fan 12V 2.8W 3-Pin

SKU CH-D6YQ-K658F

40 mm square maglev fan delivering 12 V, 2.8 W airflow through a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • Maglev bearing reduces friction for longer life
  • 12 V 2.8 W draws minimal power from the system
  • 40 mm square frame fits tight chassis spaces
  • 3-pin connector enables basic speed monitoring
  • Black finish blends with most build themes

Compact 40 mm Maglev Cooling Fan

This 40 mm square fan uses magnetic levitation bearings to reduce friction and wear. It operates at 12 V and draws 2.8 W through a standard three-pin connector. The unit is sold as a fan only without integrated lighting. It suits builders who need a small-form-factor cooler for tight chassis spaces.

Low-Noise Thermal Performance

Maglev bearing technology minimises mechanical noise during normal operation. The 12 V 2.8 W power rating keeps electrical load modest for motherboard fan headers. Airflow is directed through the 40 mm frame to dissipate heat from compact heatsinks. The design targets quiet cooling in constrained environments.

Two-Pack Convenience

The package includes two identical GM1204PQV1-8A fans for dual-fan configurations or spare replacement. No additional mounting hardware, cables or software utilities are bundled. Users simply connect each three-pin header to the board and position the fans as required. This simplifies upgrades for small-form-factor systems.

Priekšrocības

  • Maglev bearing reduces friction for longer life
  • 12 V 2.8 W draws minimal power from the system
  • 40 mm square frame fits tight chassis spaces
  • 3-pin connector enables basic speed monitoring
  • Black finish blends with most build themes

Specifikācijas

ModelGM1204PQV1-8A
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Jautājumi par šo preci

How do I install the GM1204PQV1-8A 40mm fan and what step is often missed?

Mount the 40 x 28 mm square frame using four corner screws, then plug the 3-pin connector into a 12 V fan header; the step often missed is orienting the airflow arrow toward the heatsink.

What maintenance will the maglev bearing need over time?

The maglev bearing runs without contact, so no lubrication is required; simply blow dust from the blades and frame with compressed air every few months.

What limit appears first when the fan runs continuously at 12 V and 2.8 W?

Sustained operation at the rated 12 V and 2.8 W makes the motor’s thermal limit the first constraint, so ensure the case airflow can carry away the heat.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.