Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small black 50mm square fan 15mm thick two-pin connector

OEM Industries

OEM Industries RDL5015S 50mm 12V .12A 2-pin CPU cooler

SKU CH-7TF0-X3R16

A 50mm 12V sleeve-bearing fan with a 2-pin connector for compact CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 50 mm fan fits tight chassis spaces
  • 12 V .12 A draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • Sleeve bearing runs quietly at idle
  • 15 mm slim profile clears low-clearance components

Compact 50 mm 12 V CPU fan

The OEM Industries RDL5015S is a 50 mm square frame fan designed for 12 V operation in tight chassis such as routers, switches or small-form-factor PCs. It draws 0.12 A through a two-pin connector and uses a sleeve bearing for quiet running in low-airflow environments. No LED lighting is fitted.

Buyers needing a tiny 12 V cooler for embedded gear

This unit suits builders who need a 50 mm fan with a standard two-pin header for voltage-controlled speed. It will not serve systems that require PWM control, larger airflow, or a heatsink assembly, and it lacks RGB or addressable lighting.

Two-pin 12 V power connector

The sole specification that decides fitment is the two-pin 12 V connector delivering 0.12 A; verify the motherboard or controller header matches this voltage and pin count before purchase.

Priekšrocības

  • Compact 50 mm fan fits tight chassis spaces
  • 12 V .12 A draw keeps power use low
  • 2-pin connector simplifies motherboard installation
  • Sleeve bearing runs quietly at idle
  • 15 mm slim profile clears low-clearance components

Specifikācijas

ModelRDL5015S
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Jautājumi par šo preci

How much noise and heat does the 50mm RDL5015S produce when it runs continuously at 12V?

The 50mm frame and sleeve bearing keep acoustic output low, while the 0.12A draw at 12V limits heat contribution inside the case during all-day use.

What connector and voltage must my board or device already provide for the 2-pin RDL5015S to spin up?

A standard 2-pin header supplying 12V is required; the fan draws 0.12A and has no PWM lead, so speed is fixed by the voltage present.

Will the 50mm RDL5015S clear the taller heatsinks and VRM coolers found on older motherboards?

At 50mm wide and 15mm thick, the slim profile fits tight layouts and leaves room for legacy components that sit close to the CPU socket.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.