Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 80mm square server fan 38mm thick with 4-pin connector

OEM Industries

OEM Industries V80E12BS1NB5-07 Z04 Y466 80mm 4-pin server fan

SKU CH-Q597-64YCF

80 mm ball-bearing server fan delivering 12 V DC at 4.54 A through a 4-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Original NIDEC build for server-grade reliability
  • 80 mm frame fits standard 80*80*38 mm mounts
  • Ball bearing design reduces friction and wear
  • 4-pin PWM connector enables precise speed control
  • DC 12 V 4.54 A rating delivers strong airflow

Product identity

This OEM Industries V80E12BS1NB5-07 Z04 Y466 server cooling fan is an 80mm unit with a 4-pin DC 12V connector drawing 4.54A. It targets system integrators and technicians maintaining rack or tower servers that require direct-replacement airflow components.

Installation profile

The fan uses a standard four-wire 4-pin power connector compatible with typical server headers. Ball-bearing construction reduces friction but demands correct orientation; reversing polarity or forcing the connector can damage the pins or the motor winding.

Sustained-load behaviour

Rated for continuous DC 12V 4.54A operation, the fan maintains steady airflow in 80x80x38mm form factor during extended duty cycles. Ball bearings resist wear better than sleeve types under constant rotation, though vibration may increase if mounting screws loosen over time.

Priekšrocības

  • Original NIDEC build for server-grade reliability
  • 80 mm frame fits standard 80*80*38 mm mounts
  • Ball bearing design reduces friction and wear
  • 4-pin PWM connector enables precise speed control
  • DC 12 V 4.54 A rating delivers strong airflow

Specifikācijas

ModelV80E12BS1NB5-07
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

Jautājumi par šo preci

How can I verify the V80E12BS1NB5-07 fan is spinning correctly after installation?

Connect the 4-pin connector to a 12 V header and confirm the tachometer signal reports a stable RPM in the BIOS or monitoring software.

What is included with the OEM Industries server fan and what must be sourced separately?

The package contains the 80×80×38 mm ball-bearing fan with a 4-wire PWM lead; mounting screws and any required fan filters are not supplied.

Which version of the NIDEC V80E12BS1NB5-07 should I choose for a 12 V server chassis?

Select the Z04 Y466 variant rated at 12 V and 4.54 A, which matches the 4-pin PWM interface used in standard server cooling trays.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.