Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Orico

Orico M.2 NVMe Drive Enclosure USB 3.2 10Gbps Tool-Free

SKU CH-0N2F-41EC2 MPN M.2

Tool-free M.2 NVMe enclosure with USB 3.2 10Gbps Type-C, cooling vest, thermal pad and support for four drive lengths up to 4TB

  • ColorBlack
  • TypeEnclosure
  • MaterialPlastic
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Model M.2 NVME SSD

  • Tool-free installation for quick SSD swaps
  • USB 3.2 Gen 2 at 10Gbps for fast transfers
  • UASP and TRIM support keeps performance steady
  • Supports four M.2 NVMe lengths up to 120mm
  • Includes cooling vest and thermal pad for heat control

Tool-Free NVMe Enclosure

The Orico M.2 NVMe enclosure connects a single NVMe solid-state drive to a host device through a USB 3.2 Gen 2 Type-C port rated at 10 Gbps. A tool-free sliding cover and an included cooling vest with thermal pad allow quick, screwless installation. The ABS plastic case measures 120 by 34 by 14.7 millimetres and supports drives up to 4 TB. Windows, macOS, Linux and Android systems recognise the enclosure without extra drivers. UASP and TRIM are supported for sustained performance.

Suits Portable NVMe Storage Needs

Users who want a compact, bus-powered way to read or write NVMe drives on laptops, tablets or desktops will find the enclosure straightforward. Builders who need to install multiple drives simultaneously or who require a 3.5-inch form factor cannot use this single-bay device. The package supplies a USB Type-C to Type-C cable, so hosts without a Type-C port would need a separate adapter.

10 Gbps USB 3.2 Gen 2 Interface

The decisive specification is the USB 3.2 Gen 2 connection running at 10 Gbps, which sets the maximum data throughput between the NVMe drive and the host. If the host port or cable is limited to a lower USB generation, actual speeds will fall below the drive’s potential. Buyers should verify that their system provides a 10 Gbps Type-C port to match the enclosure’s capability.

Priekšrocības

  • Tool-free installation for quick SSD swaps
  • USB 3.2 Gen 2 at 10Gbps for fast transfers
  • UASP and TRIM support keeps performance steady
  • Supports four M.2 NVMe lengths up to 120mm
  • Includes cooling vest and thermal pad for heat control

Specifikācijas

ColorBlack
TypeEnclosure
MaterialPlastic
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Citas šī modeļa versijas

Vēl 2 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the thermal pad need replacing after long use?

A thermal pad is included in the box for the initial fit. It should be checked if the enclosure is reopened, but no replacement interval is defined by the maker.

Does the 10 Gbps USB 3.2 link become the bottleneck before the SSD hits its own limit?

The USB 3.2 Gen 2 connection tops out at 10 Gbps, so any NVMe drive faster than that will be limited by the cable and port first.

How warm does the ABS case get when the drive runs all day?

The supplied cooling vest and thermal pad move heat off the SSD into the 120 x 34 x 14.7 mm ABS shell, which stays warm to the touch but has no active fan.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.