Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 16GB (2x8GB) DDR3L 1600 CL11 1.35V ECC Registered RDIMM Kit

SKU CH-CCVB-ESNHM

16 GB DDR3L 1600 CL11 ECC registered RDIMM kit for HP ProLiant Gen8 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • DDR3L 1600 speed with CL11 latency delivers responsive performance
  • Low 1.35 V operation reduces power draw and heat
  • Dual-rank 1Rx4 240-pin RDIMM kit adds 16 GB across two slots
  • Validated replacement for HP part numbers 731765B21 and 735302001

What this kit is and who it fits

This is a 16GB DDR3L ECC Registered RDIMM kit containing two 8GB modules rated at 1600MHz CL11 and 1.35V. It is built for HP ProLiant BL420c Gen8, BL460c Gen8, BL465c Gen8, BL660c Gen8 and DL160 Gen8 servers and workstations. Buyers who need unbuffered desktop memory or non-ECC modules cannot use this kit.

What to verify before ordering

Confirm that your system requires registered ECC DDR3L RDIMMs and that it accepts 1Rx4 240-pin modules at 1.35V. The memory must not be mixed with unbuffered DIMMs. Check the server documentation to ensure the memory population rules for your specific model support this configuration.

Build quality and daily implications

The modules are manufactured to JEDEC and RoHS standards and carry a limited lifetime warranty with free technical support. They use a standard 240-pin DDR3L form factor without a heat spreader, so they fit the DIMM slots on the listed ProLiant models directly. The registered design adds a clock cycle of latency but improves signal integrity in multi-DIMM server environments.

Priekšrocības

  • ECC registered design protects data integrity in server workloads
  • DDR3L 1600 speed with CL11 latency delivers responsive performance
  • Low 1.35 V operation reduces power draw and heat
  • Dual-rank 1Rx4 240-pin RDIMM kit adds 16 GB across two slots
  • Validated replacement for HP part numbers 731765B21 and 735302001

Specifikācijas

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant BL420c Gen8
HP ProLiant BL460c Gen8
HP ProLiant BL465c Gen8
HP ProLiant BL660c Gen8
HP ProLiant DL160 Gen8

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the kit include two 8 GB DDR3L RDIMMs or do I need to buy them separately?

The kit contains two 8 GB DDR3L 1600 CL11 1.35 V ECC registered RDIMMs, so no additional modules are required for a 16 GB upgrade.

Should I choose this 16 GB DDR3L 1600 CL11 kit or a different capacity for my HP ProLiant BL460c Gen8?

This 16 GB (2×8 GB) DDR3L 1600 CL11 kit matches the HP part numbers 731765B21 and 735302001 and is validated for the BL460c Gen8, making it the correct capacity for that server.

What does the PC3L-12800 1600 MHz rating mean once the modules are installed in a ProLiant DL160 Gen8?

The modules will run at 1600 MHz with CL11 latency at 1.35 V, providing registered ECC bandwidth of PC3L-12800 for the DL160 Gen8 memory controller.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.