Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four black DDR3 UDIMM modules, no heat spreaders, 240-pin gold contacts

OWC

OWC 16GB (4x4GB) DDR3 1600 CL11 ECC UDIMM desktop RAM

SKU CH-A7PF-PNC8V

16GB kit of four DDR3 1600 CL11 ECC UDIMM modules at 1.5V for desktop, workstation or server use

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (4 x 4GB)

  • 16 GB total capacity across four 4 GB modules
  • ECC unbuffered design detects and corrects single-bit errors
  • DDR3 1600 speed with CL11 latency for responsive multitasking
  • 5 V JEDEC-standard voltage ensures broad workstation and server compatibility
  • 240-pin UDIMM form factor fits select desktop, workstation and NAS systems

16GB DDR3 ECC Kit for Workstations

This kit provides 16GB of DDR3 1600 memory across four 4GB unbuffered UDIMM modules. It operates at CL11 latency with a standard 1.5V supply and includes ECC error correction. The 240-pin DIMMs are designed for desktop workstations, servers and NAS systems that require data integrity.

Upgrade from Non-ECC or Lower Capacity

Replacing standard non-ECC modules with this kit adds single-bit error correction and multi-bit detection for critical workloads. The jump is worth it when the platform supports ECC unbuffered memory and the application demands protection against silent data corruption. Four modules populate dual-channel boards fully for maximum bandwidth.

Steady Operation Under Continuous Load

JEDEC-standard timings and 1.5V operation keep power draw predictable during extended compute tasks. Without a heat spreader, airflow across the bare PCB manages thermals in typical server chassis. The modules maintain rated 1600 speed through sustained multi-threaded workloads such as virtualization hosting or file-system checksumming.

Priekšrocības

  • 16 GB total capacity across four 4 GB modules
  • ECC unbuffered design detects and corrects single-bit errors
  • DDR3 1600 speed with CL11 latency for responsive multitasking
  • 5 V JEDEC-standard voltage ensures broad workstation and server compatibility
  • 240-pin UDIMM form factor fits select desktop, workstation and NAS systems

Specifikācijas

BrandOWC
Part Number1E6D31R8016S
Capacity16GB (4 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 240-pin DDR3 DIMMs fit my motherboard slots?

These modules use the standard 240-pin DDR3 UDIMM form factor, so they fit any desktop, workstation or server board that accepts DDR3 memory.

What is the correct way to seat the four 4 GB sticks, and what step do people often miss?

Open the retention clips, align the notch on each module with the slot key, press straight down until both clips snap shut, then verify the BIOS shows all 16 GB at 1600 MHz.

Do the ECC UDIMMs need any firmware updates or periodic replacement?

No firmware is required; the JEDEC-compliant DDR3 modules run at 1.5 V with CL11 timing and are rated for the life of the system under normal workloads.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.