Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with gold edge contacts and black memory chips

OWC

OWC 2GB DDR3 1333 PC3-10600 CL9 1Rx8 204-pin 1.5V SODIMM for HP ProBook 4230s 4310s 4320s 4325s 4326s

SKU CH-Y8QM-526QT

A 2 GB DDR3 SODIMM running at 1333 MHz CL9 for HP ProBook 4230s, 4310s, 4320s, 4325s and 4326s notebooks

  • Capacity2GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Boost multitasking with a 2GB DDR3 1333 module
  • JEDEC-standard 1.5V SODIMM ensures reliable compatibility
  • CL9 latency at PC3-10600 speed improves responsiveness
  • Single 1Rx8 rank fits HP ProBook 4230s 4310s 4320s 4325s 4326s
  • 204-pin unbuffered non-ECC design enables straightforward DIY installation

Targeted DDR3 Upgrade

This 2GB DDR3 1333 SODIMM is built specifically for HP ProBook 4230s, 4310s, 4320s, 4325s and 4326s notebooks. It provides a direct memory increase for owners of those models who need more capacity for everyday multitasking.

JEDEC Standard Build

The module follows JEDEC and RoHS specifications at 1.5V with CL9 latency and a 1Rx8 unbuffered layout. Its 204-pin SODIMM form factor fits the factory memory slot without adapters, and the lack of a heat spreader keeps the profile low for tight chassis clearance.

DDR3 Platform Limits

DDR3 memory tops out at the 1333 MT/s speed rating used here, so bandwidth cannot scale beyond this interface. The single 2GB density also caps total capacity per slot, which may restrict users running memory-intensive workloads or newer operating systems.

Priekšrocības

  • Boost multitasking with a 2GB DDR3 1333 module
  • JEDEC-standard 1.5V SODIMM ensures reliable compatibility
  • CL9 latency at PC3-10600 speed improves responsiveness
  • Single 1Rx8 rank fits HP ProBook 4230s 4310s 4320s 4325s 4326s
  • 204-pin unbuffered non-ECC design enables straightforward DIY installation

Specifikācijas

BrandOWC
Part Number1S3D31R802GB
Capacity2GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProBook 4230s
HP ProBook 4310s
HP ProBook 4320s
HP ProBook 4325s
HP ProBook 4326s

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What speed does the DDR3 PC3-10600 interface actually run at?

The module operates at 1333 MHz with CL9 latency, which is the native data rate for the PC3-10600 standard.

Will this 204-pin SODIMM fit the memory slot in my HP ProBook 4320s?

Yes, the 204-pin form factor matches the DDR3 SODIMM slots used in the ProBook 4230s, 4310s, 4320s, 4325s and 4326s.

How do I install the module, and what step do people often miss?

Power off the laptop, remove the battery, open the memory door, align the notch on the 204-pin module with the slot key, press firmly until the side clips snap shut, then replace the door and battery before booting.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.