Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular DDR3 UDIMM with black chips on both sides and gold edge contacts

OWC

OWC 2GB DDR3 1333 PC3-10600 CL9 1Rx8 240-pin 1.5V Non-ECC UDIMM for HP Elite 8100 SFF Tower memory upgrade

SKU CH-XFQQ-WMVZB

A 2GB DDR3 1333 CL9 UDIMM module for HP Elite 8100 SFF and Tower systems

  • Capacity2GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • 2GB DDR3-1333 boosts multitasking on HP Elite 8100
  • CL9 1.5V timing matches factory spec for stable operation
  • 240-pin UDIMM fits SFF and Tower slots directly
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Single 1Rx8 rank module installs without tools

HP Elite 8100 SFF and Tower upgrade

This 2 GB DDR3 module is built specifically for the HP Elite 8100 SFF and the HP Elite 8100 Tower. It addresses owners of those desktops who need a single 2 GB stick to fill an empty slot. Buyers with other HP models or non-HP systems cannot use this module.

JEDEC DDR3 1333 unbuffered DIMM

The stick follows the PC3-10600 standard at 1333 MHz with CL9 latency and runs at 1.5 V. It uses a 240-pin UDIMM form factor without a heat spreader, so it fits the standard desktop slots in the compatible Elite 8100 chassis. The unbuffered, non-ECC design matches the original motherboard requirements.

Limited lifetime warranty and replacement program

OWC backs the module with a limited lifetime warranty and an advanced replacement programme that includes free technical support. The kit contains only the memory module itself; no tools, cables or software discs are supplied. Installation relies on the owner opening the case and seating the DIMM by hand.

Priekšrocības

  • 2GB DDR3-1333 boosts multitasking on HP Elite 8100
  • CL9 1.5V timing matches factory spec for stable operation
  • 240-pin UDIMM fits SFF and Tower slots directly
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Single 1Rx8 rank module installs without tools

Specifikācijas

BrandOWC
Part Number1U3D31R802GB
Capacity2GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP Elite 8100 SFF
HP Elite 8100 Tower

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What does the DDR3 1333 PC3-10600 CL9 rating mean for real-world speed?

The module runs at 1333 MHz with a PC3-10600 bandwidth rating and CL9 latency, matching the JEDEC standard for DDR3 1333.

Will this 240-pin UDIMM fit inside the HP Elite 8100 SFF chassis?

Yes, the 240-pin unbuffered DIMM is designed for the HP Elite 8100 SFF and Tower motherboards and clears the small-form-factor retention clips.

How do I install the module and what step do people often miss?

Power off, open the case, align the notch with the slot key, press firmly until both side clips click, then verify 2GB appears in BIOS before closing the cover.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.