Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge connectors and black memory chips

OWC

OWC 2GB DDR3L 1866 CL13 1Rx8 204-pin 1.35V Non-ECC SODIMM memory upgrade

SKU CH-3VCX-5DSYN

Adds 2 GB of DDR3L 1866 CL13 memory to compatible Synology NAS units including DS218+, DS418play, DS620slim, DS718+ and DS918+ models

  • Capacity2GB
  • Type204-Pin DDR3L Non-ECC SODIMM
  • SpeedDDR3L 1866 (PC3L 14900)
  • CAS LatencyCL13
  • Voltage1.35V
  • ECCNo
  • Boosts NAS responsiveness with 2GB DDR3L 1866 CL13 module
  • Low 1.35V operation cuts power draw and heat
  • Fits DS218+, DS418play, DS620slim, DS718+, DS918+
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Simple DIY install with 204-pin SODIMM form factor

Compatible NAS Memory Upgrade

This OWC module adds 2 GB of DDR3L memory to Synology NAS models DS218+, DS418play, DS620slim, DS718+ and DS918+. It is a single 204-pin SODIMM rated at 1866 MHz with CL13 latency and 1.35 V operation. The unbuffered, non-ECC design matches the factory specification for these systems.

Suitable For Single-Slot Expansion

Owners of the listed Synology units who need a modest capacity increase will find this upgrade straightforward to install. Builders requiring higher densities, dual-rank modules or ECC error correction should look elsewhere, as this stick provides only 2 GB in a single-rank 1Rx8 configuration.

1Rx8 Rank And 1.35 V Voltage

The module uses a 1Rx8 organisation and runs at the DDR3L standard voltage of 1.35 V. A system that demands a different rank structure or a 1.5 V DDR3 module will not accept this part, making those two specifications the decisive compatibility check.

Priekšrocības

  • Boosts NAS responsiveness with 2GB DDR3L 1866 CL13 module
  • Low 1.35V operation cuts power draw and heat
  • Fits DS218+, DS418play, DS620slim, DS718+, DS918+
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Simple DIY install with 204-pin SODIMM form factor

Specifikācijas

BrandOWC
Part Number1S8T31R802GB
Capacity2GB
Type204-Pin DDR3L Non-ECC SODIMM
SpeedDDR3L 1866 (PC3L 14900)
CAS LatencyCL13
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology NAS DS218+
Synology NAS DS418play
Synology NAS DS620slim
Synology NAS DS718+
Synology NAS DS918+

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the module ship alone or with any extra hardware?

The package contains a single 2GB DDR3L 1866 SODIMM; no tools, cables or additional modules are included.

My NAS has two slots — should I add one 2GB stick or two?

Each stick is 2GB; adding one raises capacity by 2GB while adding two doubles that increase to 4GB total.

What does the 1866 speed rating actually deliver in a Synology DS918+?

The module runs at 1866 MT/s with CL13 latency at 1.35V, matching the JEDEC PC3L-14900 spec the NAS expects.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.