Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green 204-pin DDR3L SODIMM module with black chips

OWC

OWC 4GB DDR3L 1600 CL11 1Rx8 204-pin 1.35V Non-ECC SODIMM for NCR POS P1532 (7734) P1535 (7761)

SKU CH-MH95-8FZKW

4GB DDR3L 1600 CL11 204-pin 1.35V SODIMM upgrades NCR POS P1532 (7734) and P1535 (7761) systems

  • Capacity4GB
  • Type204-Pin DDR3L Non-ECC SODIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 4GB DDR3L 1600 MHz boosts POS responsiveness
  • CL11 latency and 1.35 V reduce power draw
  • 204-pin SODIMM fits NCR P1532 (7734) and P1535 (7761)
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Single-rank 1Rx8 unbuffered design ensures broad compatibility

Targeted NCR POS Upgrade

This OWC module is a 4 GB DDR3L SODIMM built specifically for the NCR POS P1532 (7734) and NCR POS P1535 (7761) systems. It runs at 1600 MHz with CL11 latency at 1.35 V and uses a 1Rx8 unbuffered, non-ECC layout. The 204-pin form factor fits the factory memory slot without adapters.

Who This Suits and Who It Does Not

Technicians maintaining the listed NCR point-of-sale terminals can install this as a direct, warranty-safe memory increase. It is not for machines that require ECC error correction, registered buffering, a different voltage, or a higher capacity than the single 4 GB rank provided here.

Deciding Specification

The module conforms to the DDR3L 1600 PC3L-12800 JEDEC standard at 1.35 V with 204 pins. Verify that the target POS unit accepts this exact speed, voltage, and pin count before ordering.

Priekšrocības

  • 4GB DDR3L 1600 MHz boosts POS responsiveness
  • CL11 latency and 1.35 V reduce power draw
  • 204-pin SODIMM fits NCR P1532 (7734) and P1535 (7761)
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Single-rank 1Rx8 unbuffered design ensures broad compatibility

Specifikācijas

BrandOWC
Part Number1S6T31R804GB
Capacity4GB
Type204-Pin DDR3L Non-ECC SODIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemNCR POS P1532 NCR POS (7734)
NCR POS P1535 NCR POS (7761)

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much power does this 1.35V DDR3L module draw when the POS runs continuously?

The module operates at 1.35V, which is the low-voltage DDR3L standard. Actual power draw depends on the system workload and the NCR POS power delivery, not on the module alone.

Does the NCR POS P1532 or P1535 need any specific BIOS setting or firmware version before installing this 204-pin SODIMM?

The module is a JEDEC-standard 204-pin DDR3L SODIMM rated 1600 CL11. The NCR POS P1532 (7734) and P1535 (7761) are the listed compatible systems; no extra configuration is mentioned in the specifications.

Can this CL11 1600MHz DDR3L stick work in a laptop or mini PC that currently uses DDR3L memory?

The specifications list compatibility with laptop, mini PC and NAS systems that accept 204-pin DDR3L SODIMMs. Verify the target device supports 1.35V DDR3L at 1600MHz before installing.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.