BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276732BTC
Krājumā
OWC
OWC 4GB DDR3L 1600 CL11 204-pin 1.35V SODIMM for Synology DS1019+
A 4 GB DDR3L SODIMM running at 1600 MHz with CL11 latency, built for the Synology DS1019+ NAS
- Capacity4GB
- Type204-Pin DDR3L Non-ECC SODIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- Designed for Synology DS1019+ NAS compatibility
- 4GB DDR3L 1600 CL11 module boosts multitasking
- Low 1.35V DDR3L voltage reduces power draw
- JEDEC-standard build ensures warranty-safe upgrade
- Single 204-pin SODIMM installs in minutes
Synology DS1019+ memory upgrade
This 4GB DDR3L SODIMM is built specifically for the Synology DiskStation DS1019+ NAS. It adds capacity to the system so the unit can keep more files and applications in active memory at once. The module follows the exact specification the platform expects.
Thermals and power draw
Low-voltage DDR3L at 1.35V reduces the energy each module draws compared with standard DDR3. The unbuffered, non-ECC design has no heat spreader, relying on the NAS chassis airflow to stay cool. Operation is silent because there are no moving parts on the module itself.
Build integration
The 204-pin SO-DIMM form factor slots directly into the DS1019+ memory socket without adapters. JEDEC and RoHS compliance means the upgrade keeps the original system warranty intact. Adding this single rank module leaves any second slot free for a matching stick if the platform supports dual-channel operation.
Priekšrocības
- Designed for Synology DS1019+ NAS compatibility
- 4GB DDR3L 1600 CL11 module boosts multitasking
- Low 1.35V DDR3L voltage reduces power draw
- JEDEC-standard build ensures warranty-safe upgrade
- Single 204-pin SODIMM installs in minutes
Specifikācijas
| Brand | OWC |
|---|---|
| Part Number | 1S6T31R804GB |
| Capacity | 4GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | Synology DiskStation DS1019+ |
Jautājumi par šo preci
How do I install this 204-pin DDR3L SODIMM in the Synology DS1019+ and what step is often missed?
Power off the NAS and unplug it. Open the chassis, locate the memory slot, align the notch on the module with the key in the socket, insert at an angle, then press down firmly until the side clips click. The step often missed is verifying both clips lock fully; a loose module causes boot failures.
What maintenance or replacement will this 1.35V non-ECC module need later?
No routine maintenance is required. The module has no heat spreader, so keep the NAS vents clear of dust to maintain airflow. Replacement is only needed if a memory error appears or capacity must be increased beyond the current 4GB.
What limit appears first under sustained load with this CL11 1600MHz memory?
The CAS latency of CL11 at 1600MHz sets the access timing ceiling. Under heavy sustained workloads, the latency bound is reached before bandwidth saturates, so response time plateaus while throughput headroom remains.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
