Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips, gold edge connector, thin rectangular SODIMM shape

OWC

OWC 4GB DDR4 2133 CL15 1.2V SODIMM HP Envy 27-b002la 27-b003la 27-b005xt 27-b010 27-b011

SKU CH-ECGE-7W48Y

4GB DDR4 2133 CL15 SODIMM upgrades HP Envy 27-b002la, 27-b003la, 27-b005xt, 27-b010 and 27-b011 with 1.2V non-ECC memory

  • Capacity4GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts responsiveness with 4GB DDR4 2133MHz CL15 memory
  • Low 1.2V voltage reduces power draw and heat
  • Fits HP Envy 27-b002la, 27-b003la, 27-b005xt, 27-b010, 27-b011
  • 260-pin SODIMM form factor enables straightforward DIY installation
  • JEDEC and RoHS compliant for a warranty-safe upgrade

OWC 4GB DDR4 2133 SODIMM for HP Envy 27

This 4GB DDR4 2133 CL15 SODIMM is built for HP Envy 27 all-in-one models 27-b002la, 27-b003la, 27-b005xt, 27-b010 and 27-b011. It runs at 1.2V as an unbuffered non-ECC module. The 260-pin form factor fits the SO-DIMM slots in these specific systems.

Who this suits and who it does not

It suits owners of the listed HP Envy 27 models adding or replacing a single 4GB stick. It does not suit buyers who need ECC error correction, registered buffering, higher capacities per module, faster speeds than 2133MHz, or a different pin count.

The deciding specification

The 260-pin DDR4 SO-DIMM form factor at 2133MHz CL15 1.2V is the single specification that determines fit. Verify your Envy 27 model number matches the supported list before ordering.

Priekšrocības

  • Boosts responsiveness with 4GB DDR4 2133MHz CL15 memory
  • Low 1.2V voltage reduces power draw and heat
  • Fits HP Envy 27-b002la, 27-b003la, 27-b005xt, 27-b010, 27-b011
  • 260-pin SODIMM form factor enables straightforward DIY installation
  • JEDEC and RoHS compliant for a warranty-safe upgrade

Specifikācijas

BrandOWC
Part Number2S1D41R804GB
Capacity4GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 27-b002la
HP ENVY 27-b003la
HP ENVY 27-b005xt
HP ENVY 27-b010
HP ENVY 27-b011

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does my HP Envy 27-b010 need a free 260-pin SODIMM slot to use this 4 GB DDR4 module?

Yes, the module fits a single 260-pin DDR4 SODIMM slot, so one must be vacant or you must remove an existing stick.

Will this PC4-17000 CL15 stick run stably next to the original 2133 MHz memory already in my HP Envy 27-b003la?

It matches the factory 2133 MHz speed and CL15 timing, so the system will operate both modules at those settings.

How can I confirm the new 4 GB DDR4 2133 CL15 module is recognised correctly after installation?

Check the BIOS or Windows Task Manager — both should show the additional 4 GB running at 2133 MHz with CL15 latency.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.