BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280732BTC
Krājumā
OWC
OWC 4GB DDR4 2133 CL15 260-pin SODIMM for QNAP RAM-4GDR4K0-SO-2133 laptop RAM
A 4 GB DDR4 2133 CL15 SODIMM upgrade for compatible laptops and QNAP NAS systems
- Capacity4GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.2V
- ECCNo
- Boosts multitasking with 4GB DDR4 2133MHz speed
- Matches QNAP RAM-4GDR4K0-SO-2133 specifications exactly
- Low 1.2V voltage reduces power consumption
- CL15 latency ensures responsive system performance
- 260-pin SODIMM fits laptops and NAS systems
OWC 4GB DDR4 2133 SODIMM
This OWC module is a 4 GB DDR4 2133 CL15 SODIMM built to replace the QNAP RAM-4GDR4K0-SO-2133 part. It runs at 1.2 V, uses a 260-pin layout and is unbuffered non-ECC memory rated to JEDEC PC4-17000 standard. The stick carries OWC part number 2S1D41R804GB and has no heat spreader.
Suits laptops NAS and mini systems not ECC platforms
The memory fits laptops, all-in-one PCs, mini desktops, micro servers and NAS appliances that accept standard DDR4 SO-DIMMs. It will not work in systems that require ECC registered modules or a different pin count. Buyers needing error-correcting memory or higher capacities should look elsewhere.
260-pin DDR4 SO-DIMM form factor decides fit
The single specification that determines compatibility is the 260-pin DDR4 SO-DIMM form factor combined with 2133 MT/s speed and CL15 timing. If the target device calls for this exact pin layout and voltage the module will install; otherwise it will not seat or function.
Priekšrocības
- Boosts multitasking with 4GB DDR4 2133MHz speed
- Matches QNAP RAM-4GDR4K0-SO-2133 specifications exactly
- Low 1.2V voltage reduces power consumption
- CL15 latency ensures responsive system performance
- 260-pin SODIMM fits laptops and NAS systems
Specifikācijas
| Brand | OWC |
|---|---|
| Part Number | 2S1D41R804GB |
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Jautājumi par šo preci
Should I pick the 4GB module or look for a larger capacity?
This module provides 4GB of DDR4 memory. If your system has a free 260-pin slot and supports up to 4GB per slot, this part adds that amount directly.
What does the 2133MHz speed rating mean once the module is installed?
The module runs at 2133MHz (PC4-17000) with CL15 latency at 1.2V. Your laptop or NAS will operate the memory at this speed if the platform supports DDR4-2133; otherwise it will downclock to the highest supported speed.
Is the 260-pin SODIMM interface compatible with my QNAP NAS?
Yes. The 260-pin DDR4 SO-DIMM form factor matches the QNAP RAM-4GDR4K0-SO-2133 specification, so it fits the same slot and meets the same JEDEC standard.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
