Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge contacts and black memory chips on both sides

OWC

OWC 5R6D54R4128G 128GB DDR5 5600 PC5-44800 CL46 4Rx4 288-pin 1.1V ECC Registered RDIMM memory upgrade

SKU CH-3FS4-9FMHZ

Adds 128 GB of DDR5 5600 ECC registered memory to compatible Supermicro SuperBlade servers

  • Capacity128GB
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCYes

Capacity 128GB

  • 128 GB capacity supports large datasets and virtual machines
  • DDR5 5600 speed delivers high bandwidth for demanding workloads
  • ECC registered design protects data integrity in server environments
  • 1 V operation reduces power draw per module
  • Validated for Supermicro SuperBlade SBI-411E-1G SBI-411E-5G SBI-421E-1T3N SBI-421E-5T3N SBI-611E-1C2N

128GB DDR5 ECC RDIMM for SuperBlade

This 128GB DDR5 5600 module is built for Supermicro SuperBlade servers. It targets administrators who need registered ECC memory in a single high-density stick. The 1.1V JEDEC part installs directly into 288-pin slots on supported blades.

Who it suits and who it does not

Suits operators of SBI-411E-1G SBI-411E-5G SBI-421E-1T3N SBI-421E-5T3N SBI-611E-1C2N systems wanting maximum capacity per slot. Not for desktops or workstations that accept only unbuffered non-ECC DIMMs or that cannot use 4Rx4 registered modules.

Registered 4Rx4 ECC at 5600 MT/s

The module runs at PC5-44800 with CL46 latency and 4Rx4 organisation. Registered ECC operation is the single spec that decides compatibility; systems requiring unbuffered or load-reduced memory will not accept this part.

Priekšrocības

  • 128 GB capacity supports large datasets and virtual machines
  • DDR5 5600 speed delivers high bandwidth for demanding workloads
  • ECC registered design protects data integrity in server environments
  • 1 V operation reduces power draw per module
  • Validated for Supermicro SuperBlade SBI-411E-1G SBI-411E-5G SBI-421E-1T3N SBI-421E-5T3N SBI-611E-1C2N

Specifikācijas

BrandOWC
Part Number5R6D54R4128G
Capacity128GB
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade SBI-411E-1G
Supermicro SuperBlade SBI-411E-5G
Supermicro SuperBlade SBI-421E-1T3N
Supermicro SuperBlade SBI-421E-5T3N
Supermicro SuperBlade SBI-611E-1C2N

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Which Supermicro SuperBlade servers are confirmed to accept this 128GB DDR5 5600 ECC Registered RDIMM?

The module is validated for SuperBlade SBI-411E-1G, SBI-411E-5G, SBI-421E-1T3N, SBI-421E-5T3N and SBI-611E-1C2N.

Can this 4Rx4 registered DIMM share a channel with existing unbuffered or load-reduced ECC modules in the same SuperBlade?

No — the manufacturer states it cannot be mixed with unbuffered or ECC load-reduced memory; all DIMMs in the system must be registered ECC.

After installation, what BIOS indicator confirms the 5600 MT/s data rate and CL46 latency are active?

The memory information screen should report DDR5-5600 (PC5-44800) with a CAS latency of 46 and 1.1 V operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.