Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips and gold edge connector

OWC

OWC 8GB DDR3 1333 PC3-10600 CL9 2Rx8 204-pin 1.5V SODIMM for Alienware M17x R3

SKU CH-YADS-REHST

Adds 8 GB of DDR3 1333 CL9 SODIMM memory to an Alienware M17x R3 laptop

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo

Capacity 8GB

  • 8GB capacity lets you run more applications simultaneously
  • DDR3 1333 speed matches Alienware M17x R3 specifications
  • CL9 latency supports responsive system performance
  • 5V operation meets standard laptop memory requirements
  • 204-pin SODIMM form factor fits the M17x R3 memory slots

Single 8GB DDR3 SODIMM for Alienware M17x R3

This module delivers 8GB of DDR3 1333 PC3-10600 memory in a 204-pin SODIMM form factor. It is built specifically for the Alienware M17x R3 notebook and operates at 1.5V with CL9 latency.

Straightforward notebook installation

The SODIMM slots are typically accessed by removing a bottom panel on the M17x R3. Align the notch with the key in the slot, insert at an angle, and press down until the retention clips click. A common issue is the module not seating fully, which prevents the system from posting.

Verify slot count and maximum capacity

Check how many SODIMM sockets your M17x R3 has and the total memory limit supported by its BIOS. If all slots are already populated, you must remove an existing module to install this one. The system must accept 2Rx8 unbuffered non-ECC DDR3 at 1.5V.

Priekšrocības

  • 8GB capacity lets you run more applications simultaneously
  • DDR3 1333 speed matches Alienware M17x R3 specifications
  • CL9 latency supports responsive system performance
  • 5V operation meets standard laptop memory requirements
  • 204-pin SODIMM form factor fits the M17x R3 memory slots

Specifikācijas

BrandOWC
Part Number1S3D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemAlienware M17x R3

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I confirm the 8GB DDR3 1333 CL9 module is running correctly after installing it in my Alienware M17x R3?

Boot the laptop and open Task Manager or CPU-Z; the memory tab should show a single 8GB DDR3 module at 1333 MHz with CL9 timings and 1.5V operation.

What comes in the box with the OWC 1S3D32R808GB SODIMM and what else might I need?

The package contains one 8GB 204-pin DDR3 non-ECC SODIMM; no tools or extra cables are included, and the Alienware M17x R3 uses standard laptop screws for access.

Which capacity or version of this DDR3 1333 SODIMM should I choose for the M17x R3?

This specific part is an 8GB 2Rx8 CL9 1.5V module validated for the Alienware M17x R3; select it when you need a single 8GB upgrade matching the factory specification.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.