Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge connector and black memory chips

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 1.5V SODIMM HP Envy 6

SKU CH-WZAR-ENH86

An 8 GB DDR3 SODIMM running at 1600 MHz CL11 1.5 V, built for HP Envy 6 laptops

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boost responsiveness with 8 GB DDR3 1600 CL11 memory
  • JEDEC-standard 1.5 V module ensures warranty-safe upgrade
  • 2Rx8 dual-rank design improves multitasking throughput
  • 204-pin SODIMM fits HP Envy 6 DDR3 slots directly
  • Lifetime warranty with free tech support included

HP Envy 6 DDR3 SODIMM Upgrade

This OWC module is an 8 GB DDR3 1600 CL11 SODIMM built specifically for HP Envy 6 series laptops that use DDR3 memory. It arrives new and ready to install as a direct replacement or capacity increase.

Suitable for Envy 6 owners adding memory

It fits HP Envy 6 models that accept 204-pin DDR3 SODIMMs at 1.5 V. Buyers whose Envy 6 requires a different pin count or voltage, or who need ECC or registered modules, should look elsewhere.

8 GB DDR3 1600 CL11 2Rx8 1.5 V SODIMM

The single specification that decides fit is the DDR3 1600 CL11 2Rx8 1.5 V 204-pin SODIMM profile. Match these exact parameters against your Envy 6 service manual before ordering.

Priekšrocības

  • Boost responsiveness with 8 GB DDR3 1600 CL11 memory
  • JEDEC-standard 1.5 V module ensures warranty-safe upgrade
  • 2Rx8 dual-rank design improves multitasking throughput
  • 204-pin SODIMM fits HP Envy 6 DDR3 slots directly
  • Lifetime warranty with free tech support included

Specifikācijas

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 6 Series using DDR3 Memory

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the CL11 latency become a bottleneck during long encoding sessions?

CL11 is the rated CAS latency at 1600 MHz; it remains constant under sustained load and does not degrade over time.

How much heat does the 1.5 V module add to an HP Envy 6 chassis running all day?

The module operates at 1.5 V without a heat spreader, adding minimal thermal load to the laptop’s existing cooling.

Does the HP Envy 6 need a free 204-pin SODIMM slot for this upgrade?

Yes, the 204-pin DDR3 SODIMM requires an available DDR3 SODIMM slot in the HP Envy 6 series.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.