Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge connectors and black memory chips

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 204-pin 1.5V SODIMM for HP Envy dv6

SKU CH-SCPF-W7K70

8 GB DDR3 SODIMM running at 1600 MHz CL11, built for HP Envy dv6 laptops

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 8 GB single module doubles capacity for HP Envy dv6
  • DDR3 1600 CL11 speed matches factory spec for stable operation
  • 5 V JEDEC standard voltage ensures warranty-safe upgrade
  • 204-pin SODIMM form factor fits laptop memory slots directly
  • 2Rx8 dual-rank organisation supports multitasking workloads efficiently

8GB DDR3 SODIMM for HP Envy dv6

This 8GB DDR3 1600 SODIMM is built for HP Envy dv6 series laptops that use DDR3 memory. It provides a single-module upgrade path for compatible systems. The 204-pin unbuffered design matches the factory slot specification. JEDEC-standard construction keeps the upgrade warranty-safe.

Suits owners of compatible HP Envy dv6 models.

The module is validated for HP Envy dv6 series notebooks using DDR3. Builders working on different laptop lines, desktop boards, or small-form-factor PCs should verify their platform requirements first. Systems that need ECC or registered memory cannot use this non-ECC stick. Buyers who want more than one module must purchase additional units separately.

1600 MHz CL11 at 1.5 V

The stick runs at PC3-12800 speed with CL11 latency and 1.5 V operation. This exact speed, latency, and voltage combination decides whether the module matches the system's memory controller. The 2Rx8 rank organisation is fixed and cannot be changed. Match these three figures to the service manual before ordering.

Priekšrocības

  • 8 GB single module doubles capacity for HP Envy dv6
  • DDR3 1600 CL11 speed matches factory spec for stable operation
  • 5 V JEDEC standard voltage ensures warranty-safe upgrade
  • 204-pin SODIMM form factor fits laptop memory slots directly
  • 2Rx8 dual-rank organisation supports multitasking workloads efficiently

Specifikācijas

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY dv6 Series using DDR3 Memory

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How can I confirm the OWC 8GB DDR3 1600 CL11 module is running at the correct speed after installing it in my HP Envy dv6?

Open Task Manager or a hardware monitor such as CPU-Z and verify the memory frequency reads 800 MHz (DDR3-1600) with timings of 11-11-11.

What comes in the package with the OWC 1S6D32R808GB SODIMM and is anything else required for installation?

The box contains the single 8GB 204-pin DDR3 SODIMM only; no tools or extra cables are needed — just a small Phillips screwdriver to open the laptop’s memory door.

My HP Envy dv6 has two DDR3 slots — should I buy one 8GB module or two 4GB modules for the best performance?

A single 8GB 2Rx8 stick leaves the second slot free for a matching module later and keeps dual-channel bandwidth identical to a 2×4GB kit when paired.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.