Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips and gold edge connector

OWC

OWC 8GB DDR4 2133MHz CL15 1.2V 288-pin UDIMM HP Envy Phoenix 860 memory upgrade

SKU CH-FJSA-PP08C

8GB DDR4 2133MHz CL15 UDIMM validated for HP Envy Phoenix 860 desktops

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 8GB capacity lets you run more apps simultaneously
  • DDR4 2133MHz CL15 speed matches HP Envy Phoenix 860 specs
  • 2V low voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits the desktop DIMM slots
  • JEDEC compliant and ROHS certified for a warranty-safe upgrade

System-specific DDR4 upgrade

This 8 GB DDR4 module is built for HP Envy Phoenix 860 desktops including the 860-011ns, 860-012nf, 860-013nf, 860-014 and 860-014nf. It uses a 288-pin unbuffered UDIMM form factor and runs at the standard 1.2 V. Buyers with other platforms cannot use this memory.

Sustained-load behaviour

The module operates at DDR4 2133 (PC4-17000) with CL15 latency and a 2Rx8 rank configuration. Without a heat spreader it relies on case airflow to maintain stable temperatures during extended workloads. Non-ECC circuitry means data integrity is not corrected automatically under continuous operation.

JEDEC DDR4 limits

Full compliance with JEDEC DDR4 specifications defines the electrical and timing boundaries of this upgrade. The 2133 MT/s rate is the baseline speed for this generation; higher frequencies are not supported by the module itself. Builders needing ECC, registered signalling or speeds beyond PC4-17000 must select a different product.

Priekšrocības

  • 8GB capacity lets you run more apps simultaneously
  • DDR4 2133MHz CL15 speed matches HP Envy Phoenix 860 specs
  • 2V low voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits the desktop DIMM slots
  • JEDEC compliant and ROHS certified for a warranty-safe upgrade

Specifikācijas

BrandOWC
Part Number2U1D42R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-011ns
HP ENVY Phoenix 860-012nf
HP ENVY Phoenix 860-013nf
HP ENVY Phoenix 860-014
HP ENVY Phoenix 860-014nf

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the 1.2V DDR4 module run cool and quiet inside the HP Envy Phoenix 860 chassis all day?

The module operates at the standard 1.2V DDR4 voltage with no heat spreader, so it adds minimal heat and makes no noise during continuous use.

My HP Envy Phoenix 860-014 has four 288-pin DDR4 slots — is that all I need to install this 8GB stick?

Yes, the system uses standard 288-pin DDR4 UDIMM slots, so the module fits directly without extra parts or tools.

Will this CL15 2133MHz stick work alongside the original memory already in my 860-012nf?

It matches the factory DDR4 2133 CL15 specification, so it will run at the same speed and timings as the installed modules.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.