Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

partaker

Partaker I3 barebone mini PC i7-10510U/10610U 32GB 512GB

SKU CH-XBT9-XESEF

Fanless industrial mini PC with an Intel Core i7 10th Gen processor, 32 GB DDR4, 512 GB SSD, dual display outputs, two serial ports and seven USB ports

  • ColorBlack
  • CPU TypeIntel Core i7 10th Gen
  • Fanless design enables silent 24/7 operation at just 15W power draw
  • Intel Core i7 10th Gen processor delivers strong performance for industrial workloads
  • Dual HDMI and VGA outputs drive two independent displays simultaneously
  • Extensive legacy I/O includes two COM RS232 ports plus seven USB ports
  • Aluminium chassis supports wide 0 °C to 70 °C operating temperature range

Compact fanless mini-PC with 10th-gen Core i7

The Partaker I3 is a new aluminium barebone that ships with an Intel Core i7-10510U or i7-10610U processor, 32 GB of DDR4-2666 memory and a 512 GB SSD. It runs Windows 11 from the factory and uses a passive cooling design rated for continuous 24/7 operation at up to 70 °C. Dual-display output is provided through HDMI and VGA ports.

Suited for embedded, signage

The fanless chassis and wide 100-240 V AC input make it a fit for DIN-rail or wall mounting in cabinets, kiosks or factory floors where silent, dust-proof operation is required. Two COM RS232 ports and dual Gigabit LAN support legacy automation gear. Buyers who need discrete graphics, active cooling or more than two display outputs should look at other form factors.

15 W typical power draw decides deployment

With a 12 V 5 A supply and a measured consumption of 15 W to 25 W, the unit can run from compact UPS batteries or PoE injectors in remote cabinets. The low thermal envelope allows fanless mounting in sealed enclosures without airflow. If the available power budget or enclosure thermal limit is lower than 15 W, a different platform is needed.

Priekšrocības

  • Fanless design enables silent 24/7 operation at just 15W power draw
  • Intel Core i7 10th Gen processor delivers strong performance for industrial workloads
  • Dual HDMI and VGA outputs drive two independent displays simultaneously
  • Extensive legacy I/O includes two COM RS232 ports plus seven USB ports
  • Aluminium chassis supports wide 0 °C to 70 °C operating temperature range

Specifikācijas

ColorBlack
CPU TypeIntel Core i7 10th Gen

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What display outputs does the HDMI and VGA combination on this Partaker I3 actually support?

The HDMI and VGA ports enable dual-screen operation with simultaneous or different content on each display, driven by the Intel Core i7-10510U/10610U processor graphics.

What physical mounting features does the 234 x 150 x 43 mm aluminium chassis include?

The unit is an IPC-type enclosure with integrated mounting ears for wall or DIN-rail installation, and it weighs 2.5 kgs.

How do I add the 32 GB DDR4-2666 SO-DIMM modules into the two slots without damaging the fanless thermal pad?

Remove the bottom cover, align each module notch with the slot key, press firmly until the side clips lock, then replace the cover so the thermal pad contacts the CPU again.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.