Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Grey foam gasket strip for 120mm fans, 10mm thick compressible seal with adhesive backing

Phobya

Phobya Radiator Gasket 120mm 10mm Grey 38335

SKU CH-SD57-Y97XS

Grey 120 mm radiator gasket compresses from 10 mm to under 4 mm with self-adhesive backing to seal fan gaps and boost cooling efficiency

  • ColorGrey
  • FeaturesGasket for ideal fan installation on radiators or in enclosu
  • Reduces airflow leakage for better radiator efficiency with a 10mm compressible foam gasket
  • Self-adhesive backing enables quick mounting on 120mm fans or radiator frames
  • Compresses under pressure to seal gaps between fan and component surfaces
  • Pre-cut 120mm dimensions fit standard fan sizes without trimming required
  • Fine plastic foam material maintains seal integrity in water cooling installations

120 mm Radiator Gasket

This Phobya gasket fits 120 mm fans and sits between the fan frame and a radiator or enclosure. The fine plastic foam compresses from 10 mm down to less than 4 mm under mounting pressure, sealing the small gaps that let air bypass the radiator. Part number 38335 identifies the grey version supplied new.

Self-adhesive mounting

One face carries a self-adhesive strip so the gasket can be fixed to the radiator or chassis before the fan is screwed down. The foam then fills the uneven joint between the two surfaces, reducing turbulent leakage and letting the fan push more air through the fins. No tools beyond the standard fan screws are required.

Pre-cut fit for 120 mm fans

The gasket arrives already cut to the 120 mm bolt pattern, so alignment is immediate and no trimming is needed. By eliminating bypass airflow the accessory raises the effective static pressure across the radiator, improving loop temperatures without changing fans or pump speed.

Priekšrocības

  • Reduces airflow leakage for better radiator efficiency with a 10mm compressible foam gasket
  • Self-adhesive backing enables quick mounting on 120mm fans or radiator frames
  • Compresses under pressure to seal gaps between fan and component surfaces
  • Pre-cut 120mm dimensions fit standard fan sizes without trimming required
  • Fine plastic foam material maintains seal integrity in water cooling installations

Specifikācijas

BrandPhobya
Model38335
Part Number38335
ColorGrey
FeaturesGasket for ideal fan installation on radiators or in enclosures.

Jautājumi par šo preci

How thick is the 120 mm gasket when compressed?

The gasket starts at 10 mm and compresses to less than 4 mm under pressure, sealing the gap between fan and radiator.

Does the 38335 gasket include adhesive for mounting?

Yes, one side carries self-adhesive tape so you can stick it to the radiator or enclosure before laying the fan on top.

What is the correct order for installing the 120 mm gasket?

Peel the backing, fix the gasket to the radiator, then place the fan and tighten the screws — do not mount the fan first.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.