Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black cube case with tempered glass front and side panels, three ARGB fans visible behind glass

Raidmax

Raidmax Infinita i600 Micro ATX Cube Case Black

SKU CH-2ZKC-CMF5V

Micro-ATX cube case with tempered glass front and side panels, three pre-installed 120 mm ARGB fans, support for 360 mm radiators and graphics cards up to 400 mm long

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialSteel / Tempered Glass
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityMicro-ATX / Mini-ITX

Case+PSU+Cooler i600 Black - Micro ATX Cube with 3 ARGB Fans

  • Three pre-installed ARGB fans light the build and can be controlled via the I/O button or motherboard sync
  • Tempered glass front and side panels showcase components while keeping dust out
  • Supports radiators up to 360 mm in the top and front for high-capacity liquid cooling
  • Fits graphics cards up to 400 mm long and CPU coolers up to 157 mm tall
  • USB 3.0 port on the I/O panel provides fast external connectivity

Cube case for Micro-ATX builds

The Raidmax Infinita i600 is a compact cube chassis designed for Micro-ATX and Mini-ITX motherboards. It ships with three pre-installed 120 mm ARGB fans, two on the motherboard tray and one at the rear. Tempered glass covers the front and right side panels, giving a clear view of internal components while keeping dust out.

Upgrade from closed mid-towers

Builders moving from a traditional mid-tower with limited glass and no ARGB lighting will gain a showcase layout and simplified fan control via the I/O button or motherboard sync. The jump is worth it when you want a smaller footprint with support for 360 mm radiators on the front or top and a 240 mm unit on the motherboard tray.

Check motherboard size and GPU length

Verify your board is Micro-ATX or Mini-ITX, as full-size ATX is not supported. Measure your graphics card; the maximum length allowed is 400 mm. Confirm CPU cooler height stays within 157 mm. The case holds two 3.5 inch and three 2.5 inch drives, and provides four expansion slots. USB 3.0 is available on the front panel.

Priekšrocības

  • Three pre-installed ARGB fans light the build and can be controlled via the I/O button or motherboard sync
  • Tempered glass front and side panels showcase components while keeping dust out
  • Supports radiators up to 360 mm in the top and front for high-capacity liquid cooling
  • Fits graphics cards up to 400 mm long and CPU coolers up to 157 mm tall
  • USB 3.0 port on the I/O panel provides fast external connectivity

Specifikācijas

BrandRAIDMAX
SeriesINFINITA
Modeli600
TypeATX Mid Tower
ColorBlack
Case MaterialSteel / Tempered Glass
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityMicro-ATX / Mini-ITX
Side Panelwith Side Window
LEDARGB
Dust FiltersTop
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays3
Expansion Slots4
Fan OptionsTop: 120mm x 3
Rear: 120mm x 1
Bottom: 120mm x 3
M/B tray: 120mm x 2
Radiator OptionsTop: 360mm / ?Rear: 120mm / M/B tray: 240mm
120mm FansARGB LED Fan 120mm x 2 (M/B Tray) / ARGB LED Fan 120mm x 1 (rear)
Max GPU Length400 mm
Max CPU Cooler Height157 mm
Dimensions415(L) x 280(W) x 377(H)

Citas šī modeļa versijas

Vēl 1 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 400 mm maximum GPU length and 157 mm CPU cooler height limit fit my parts?

The case accepts graphics cards up to 400 mm long and CPU coolers up to 157 mm tall, so measure your components against those limits before buying.

How do I connect the three pre-installed ARGB fans for motherboard control?

Plug the included ARGB hub into a 5 V addressable RGB header on the motherboard, then use the board's software or the case I/O button to synchronise lighting.

What dust filters need regular cleaning on this cube case?

A magnetic dust filter sits on the top panel; remove and rinse it periodically to maintain airflow through the three top fan mounts.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.