NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Replace Power
A 250W ATX replacement unit with reduced depth, 20+4 pin and SATA connectors, and full protection circuits for listed Dell Dimension and Optiplex systems
This 250 watt ATX unit replaces the original power supply in Dell Dimension B110, 1100, 2200, 2300, 2350, 2400, 2450, 3000, 4300, 4400, 4500, 4550, 4600, 8200, 8250, 8300 and OptiPlex 170L, GX50, GX60, GX150, GX240 systems. It also fits PowerEdge 400SC, 600SC and Workstation 210, 220, 340, 350, 400 models. The reduced depth design helps it fit tighter legacy chassis.
A built-in 20+4 pin ATX connector supports both 20 and 24 pin motherboards. One P4 12V four-pin, three SATA 15-pin, three LP4 four-pin and one floppy four-pin connector cover drives and peripherals from that era. The 110-260V AC switchable input lets the unit operate on different mains voltages without modification.
Over current, over power, over voltage and short circuit protection circuits guard components during sustained operation. The +12V rails each deliver 8A while the +5V rail provides 12A and the +3.3V rail provides 11A, with a +5VSB rail at 2A. Rated for continuous use at up to 50°C ambient temperature.
| Brand | Replace Power |
|---|---|
| Model | RPSU-b110-250 |
| Type | ATX |
| Fans | 1 |
| Weight | 1.5 |
It is rated for continuous operation up to 50 °C ambient on full load, so the thermal ceiling is reached only if the case temperature exceeds that point.
The unit uses one fan; at 250 W load it moves enough air to keep internal temperatures within the 0–50 °C spec, producing typical office-level noise.
Your board needs a 20- or 24-pin ATX socket plus a 4-pin P4 12 V connector; the supply provides both via its built-in 20+4 pin adapter.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?