NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Replace Power
420W ATX power supply with switchable 110V/220V input, 80mm cooling fan, SATA, 20+4 pin ATX, 12V ATX and multiple Molex connectors for HP Pavilion desktops
This 420 watt ATX power supply is built as a direct replacement for HP Pavilion a1312n a1314n a1319h a1320n a1283w a1330e CTO desktops. It suits owners of those chassis who need to restore power delivery after a unit failure. The grey enclosure fits the original mounting points without modification.
The unit provides a 14 inch 20+4 pin ATX motherboard connector, a 14 inch 12V ATX connector, one 15 inch SATA connector, two 15 inch large peripheral connectors, two 6 inch large peripheral connectors and one 6 inch small peripheral connector. Cable lengths and plug types must match the original harness exactly for the HP models listed.
A single 80mm fan handles cooling across the 420W load range. Input voltage is switchable between 110V and 220V. Acoustic output and power draw scale with system demand; no further thermal or efficiency figures are published.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-16 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
It supplies up to 420W of total power to the motherboard, drives and peripherals in that chassis, matching the original specification for the listed Pavilion models.
A 20+4 pin ATX connector is provided, allowing it to plug into both 20-pin and 24-pin motherboard sockets found in the compatible HP systems.
It fits a standard ATX cut-out, uses an 80mm fan for cooling and weighs 0.1, so it mounts with four screws like the original supply in the Pavilion a1314n, a1319h, a1320n, a1283w and a1330e CTO.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?