Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Grey ATX power supply, reduced depth, single fan, SATA and 20+4 pin connectors

Replace Power

Replace Power RPSU-C99-71 power supply

SKU CH-912G-AXXB6 MPN RPSU-C99-71

ATX power supply fits eMachines T2596, T2240, T1840, H2865, D2586, C6537 with 20/24-pin, SATA, 12V and LP4 connectors

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy eMachines power supplies across multiple models
  • Switchable 115 / 230 V input suits global mains voltages
  • Reduced 5.9" depth fits compact chassis layouts
  • Over-current and over-voltage protection guards connected components
  • Includes SATA, 20+4-pin ATX and 12 V connectors for drives and motherboard

Replacement PSU for eMachines Systems

This Replace Power unit model RPSU-C99-71 is an ATX power supply built to replace the original PSU in several older eMachines desktops including the T2596 T2240 T1840 H2865 D2586 and C6537. It delivers standard ATX power through a 20+4 pin motherboard connector a 12V ATX connector two large peripheral connectors and one SATA connector. A single 80mm fan provides cooling in a grey chassis weighing 2.5kg.

Suitable for Legacy Desktop Restorations

This supply suits owners of the listed eMachines models who need a direct replacement with switchable 115 or 230V input and the exact connector mix those boards require. Builders working on modern platforms or systems needing multiple SATA drives PCIe graphics power or higher total wattage should look at a current design instead.

Reduced Depth Chassis for Tight Cases

The housing measures 5.9 inches in height and 3.4 inches in width giving it a shorter depth than many standard ATX units. This physical profile lets it fit inside the compact eMachines cases the target models use without blocking drive bays or expansion cards.

Priekšrocības

  • Replaces legacy eMachines power supplies across multiple models
  • Switchable 115 / 230 V input suits global mains voltages
  • Reduced 5.9" depth fits compact chassis layouts
  • Over-current and over-voltage protection guards connected components
  • Includes SATA, 20+4-pin ATX and 12 V connectors for drives and motherboard

Specifikācijas

BrandReplace Power
ModelRPSU-C99-71
ColorGrey
TypeATX
Fans1
Weight2.5

Jautājumi par šo preci

Will the RPSU-C99-71 fit in the same space as the original power supply in my eMachines T2596?

The unit measures 5.9 inches in height and 3.4 inches in width with a reduced depth design, matching the legacy form factor used in the T2596 and listed models.

How can I verify the RPSU-C99-71 is delivering stable power after installation?

The supply includes over-current, over-power and over-voltage protection circuits; a successful POST and stable operation under load confirm the protections are functioning.

Does the RPSU-C99-71 come with a SATA power cable for my SSD, or must I buy one separately?

One SATA power connector is built into the harness, so a separate cable is not required for a single SATA drive.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.