SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.0049743BTC
Krājumā
RIMLANCE
RIMLANCE REU19200D8C16 16GB DDR4 2400MHz ECC UDIMM 2Rx8
16 GB DDR4 ECC UDIMM running at 2400 MHz with CL17 latency and 1.2 V operation
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- ECCYes
- Buffered/RegisteredUnbuffered
- 16GB single module expands server memory capacity
- 2400MHz DDR4 speed enables fast data throughput
- ECC protection detects and corrects memory errors
- 2V operation reduces power draw and heat
- 2Rx8 dual-rank layout increases bandwidth efficiency
16 GB DDR4 ECC UDIMM for servers
This single 16 GB module runs at 2400 MHz with a PC4-19200 rating and CL17 latency. It uses 288-pin DDR4 SDRAM at 1.2 V and provides error-correcting code for data integrity. The unbuffered 2Rx8 design suits standard server and workstation slots.
Suits ECC-capable servers needing unbuffered memory
Buyers whose platforms require registered or load-reduced DIMMs cannot use this module. Systems limited to lower speeds or non-ECC memory will not gain the error-correction benefit. Workstations without ECC support in the BIOS should look elsewhere.
Stable throughput under continuous server workloads
The ECC function detects and corrects single-bit errors during sustained operation. Dual-rank organisation maintains bandwidth efficiency when multiple threads access memory. Standard 1.2 V operation keeps thermals predictable during long-running tasks.
Priekšrocības
- 16GB single module expands server memory capacity
- 2400MHz DDR4 speed enables fast data throughput
- ECC protection detects and corrects memory errors
- 2V operation reduces power draw and heat
- 2Rx8 dual-rank layout increases bandwidth efficiency
Specifikācijas
| Brand | RIMLANCE |
|---|---|
| Model | REU19200D8C16 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Jautājumi par šo preci
Does my motherboard need a 288-pin DDR4 UDIMM slot for this module?
Yes, the module is a 288-pin DDR4 UDIMM and requires a matching slot.
Will this ECC UDIMM work in a system that currently uses non-ECC DDR4 2400MHz UDIMMs?
ECC and non-ECC UDIMMs cannot be mixed; the board must support ECC and all installed modules must be ECC.
How can I verify the module is running at 2400MHz with CL17 timings after installation?
Check the memory speed and CAS latency in the BIOS or with a tool such as CPU-Z to confirm 2400MHz and CL17.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
