SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00502487BTC
Krājumā
sakose
sakose BT-PEU310 USB 3.0 PCIe expansion card 2 ports
Adds two USB 3.0 ports to a desktop via PCI Express for up to 5.0 Gbps transfer speeds
- TypePCI Express to USB Card
- External USB Ports2x USB Ports
- StandardUSB 3.0
- Data Transfer RateUp to 5.0 Gbps
- Operating Systems SupportedWindows XP, 2003 Server, Vista, 2008 Server and 7
- FeaturesNEC uPD720200 Chipset Supports PCI Express 2.0 X 1 Lane, can
- Add two SuperSpeed USB ports to your desktop via PCI Express
- Transfer data at up to 5.0 Gbps with the NEC uPD720200 chipset
- Works with USB 1.0, 1.1 and 2.0 devices for full backwards compatibility
- Supports Windows XP, Vista, 7, 2003 Server and 2008 Server
- PCI Express 2.0 x1 lane interface quadruples available computing bandwidth
Two-port USB 3.0 PCIe add-in card
The sakose BT-PEU310 installs into a PCI Express 2.0 x1 slot and provides two external USB 3.0 Type-A ports. It is built around the NEC uPD720200 chipset and supports data rates up to 5.0 Gbps. The card targets desktop owners who need extra SuperSpeed ports for external drives or peripherals.
Backwards compatibility with older USB gear
The ports accept USB 1.0, 1.1 and 2.0 devices, so legacy keyboards, mice and flash drives continue to work without adapters. Operating system support covers Windows XP, 2003 Server, Vista, 2008 Server and 7. No additional software bundle is mentioned in the specifications.
Low-profile bracket and single-lane design
A single-lane PCIe 2.0 connector keeps the card compatible with short slots and small form-factor cases. The two Type-A ports sit on a standard bracket for direct rear-panel access. No external power connector is required, simplifying installation in compact builds.
Priekšrocības
- Add two SuperSpeed USB ports to your desktop via PCI Express
- Transfer data at up to 5.0 Gbps with the NEC uPD720200 chipset
- Works with USB 1.0, 1.1 and 2.0 devices for full backwards compatibility
- Supports Windows XP, Vista, 7, 2003 Server and 2008 Server
- PCI Express 2.0 x1 lane interface quadruples available computing bandwidth
Specifikācijas
| Brand | BYTECC |
|---|---|
| Model | BT-PEU310 |
| Type | PCI Express to USB Card |
| External USB Ports | 2x USB Ports |
| Standard | USB 3.0 |
| Data Transfer Rate | Up to 5.0 Gbps |
| Operating Systems Supported | Windows XP, 2003 Server, Vista, 2008 Server and 7 |
| Features | NEC uPD720200 Chipset Supports PCI Express 2.0 X 1 Lane, can transferring up to 5Gbps MAX Supports USB 3.0 specification type A connector X2 ports Supports the following speed data rate as follows: Low-speed(1.5Mbps)/Full-speed(12Mbps)/High-speed(480Mbps)/Super-speed(5Gbps) Backward compatible with USB 1.1 & 2.0 Supports PCI Low Profile Supports External Power Socket in order to supplying power for each USB3.0 connector up to 900mA MAX/port |
Jautājumi par šo preci
Will the NEC uPD720200 chipset on this card need a firmware update or driver reinstall after a Windows upgrade?
The card uses the NEC uPD720200 chipset with native driver support in Windows 7 and earlier; newer Windows versions may require a manual driver install from the chipset vendor.
What throughput limit appears first when both USB 3.0 ports run at 5.0 Gbps simultaneously?
The single PCI Express 2.0 x1 lane caps combined bandwidth at 5.0 Gbps, so simultaneous full-speed transfers on both ports will share that ceiling.
How much extra heat or power draw should I expect from the BT-PEU310 during all-day file transfers?
The card draws power only from the PCIe slot with no external connector, so added heat and power use stay minimal during sustained transfers.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
