Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

SAMSUNG

SAMSUNG 16GB DDR4-2133 LP ECC REG server RAM

SKU CH-9EDJ-MT47M

16GB DDR4-2133 LP ECC registered server memory module operating at 1.20V

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity supports memory-intensive server workloads
  • DDR4-2133 speed delivers 17000 MT/s data throughput
  • 20 V operation reduces power draw per module
  • ECC registered design detects and corrects memory errors
  • Low-profile form factor fits dense 1U server chassis

16GB DDR4-2133 registered ECC module

This 16GB DDR4-2133 LP ECC registered DIMM is built for server platforms that require error-correcting, registered memory. It operates at 1.20V and carries Supermicro certification for qualified compatibility. The module suits administrators upgrading or populating qualified Supermicro systems with reliable server-grade memory.

Replaces non-ECC or unbuffered DIMMs in qualified

The jump is worthwhile when the platform mandates registered ECC DDR4-2133 memory and the current configuration uses unsupported module types. Supermicro certification confirms the part meets the vendor's validation criteria for these systems. Buyers who need higher capacities per slot or faster DDR4 speeds should verify the platform's maximum supported specification before ordering.

Verify registered ECC DDR4-2133 support

Check the system documentation or motherboard manual to confirm the platform accepts registered ECC DDR4-2133 modules at 1.20V. Ensure the memory controller and BIOS revision support the 16GB density per DIMM and review any slot population or channel requirements. Buyers who need unbuffered non-ECC memory or a different DDR generation cannot use this module.

Priekšrocības

  • 16 GB capacity supports memory-intensive server workloads
  • DDR4-2133 speed delivers 17000 MT/s data throughput
  • 20 V operation reduces power draw per module
  • ECC registered design detects and corrects memory errors
  • Low-profile form factor fits dense 1U server chassis

Specifikācijas

Capacity16GB
SpeedDDR4 2133 (PC4 17000)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered

Jautājumi par šo preci

Does the 16GB DDR4-2133 LP ECC REG module fit a standard 288-pin DIMM slot?

Yes, it uses the standard DDR4 288-pin form factor and the low-profile height clears most server heatsinks.

What is the correct way to seat this registered ECC DIMM so the register engages?

Align the notch with the slot key, press straight down until both side clips click, then verify the module sits flush with no tilt.

When should this 1.20V Samsung module be replaced in a production server?

Replace it if the system logs show recurring correctable ECC errors that persist after reseating, or if diagnostics report uncorrectable failures.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.