SAMSUNG
SAMSUNG 970 PRO M.2 2280 1TB internal SSD MZ-V7P1T0BW
- Internal Solid Stat…
- Consumer
223,99 $
0.0028799BTC
Krājumā
SAMSUNG
SAMSUNG 970 PRO M.2 2280 512GB internal SSD MZ-V7P512BW
M.2 2280 internal SSD with 512GB capacity, PCIe Gen3 x4 NVMe 1.3 interface, 3500 MBps sequential read, 2300 MBps sequential write, 64-layer V-NAND MLC, 512MB LPDDR4 cache, and 600 TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity512GB
- Memory Components64L V-NAND MLC
- InterfacePCIe Gen3. X4, NVMe 1.3
Options 512GB
- 1TB
- 512GB
- Up to 3500 MB/s sequential read speeds
- Up to 2300 MB/s sequential write speeds
- 512GB capacity with 64-layer V-NAND MLC
- 512MB LPDDR4 DRAM cache for sustained performance
- 5 million hour MTBF for long-term reliability
Capacity and Interface
The Samsung 970 PRO M.2 2280 512GB drive uses a PCIe Gen3.0 x4 NVMe 1.3 interface with 64-layer V-NAND 2-bit MLC memory and a Samsung Phoenix controller backed by 512MB LPDDR4 cache. It is built for tech enthusiasts, high-end gamers and 4K or 3D content designers who need sustained throughput.
Installation and Common Issues
The drive fits a standard M.2 2280 slot keyed for PCIe NVMe. Dynamic Thermal Guard monitors temperature and throttles automatically to protect the controller under heavy load. Most problems arise when motherboard firmware lacks NVMe 1.3 support or when the slot shares bandwidth with other PCIe devices, limiting the drive to lower speeds.
Capacity and Headroom
Sequential reads reach 3500 MBps and writes 2300 MBps, while random 4KB performance hits 370,000 IOPS read and 500,000 IOPS write at queue depth 32. The 600 TBW endurance rating and 1,500,000-hour MTBF provide ample headroom for intensive workloads, though sustained writes can push active power to 8.5W and temperatures toward the 70°C limit.
Priekšrocības
- Up to 3500 MB/s sequential read speeds
- Up to 2300 MB/s sequential write speeds
- 512GB capacity with 64-layer V-NAND MLC
- 512MB LPDDR4 DRAM cache for sustained performance
- 5 million hour MTBF for long-term reliability
Specifikācijas
| Brand | SAMSUNG |
|---|---|
| Series | 970 PRO |
| Model | MZ-V7P512BW |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Memory Components | 64L V-NAND MLC |
| Interface | PCIe Gen3. X4, NVMe 1.3 |
| Controller | Samsung Phoenix Controller |
| Cache | 512MB LPDDR4 DRAM |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 2300 MBps |
| 4KB Random Read | QD32: Up to 370,000 IOPS QD1: Up to 15,000 IOPS |
| 4KB Random Write | QD32: Up to 500,000 IOPS QD1: Up to 55,000 IOPS |
| MTBF | 1,500,000 hours |
| Power Consumption (Idle) | Max. 30 mW |
| Power Consumption (Active) | Average: 5.2W Maximum: 8.5W (Burst mode) |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,500G & 0.5 ms (Half sine) |
| Height | 2.30mm |
| Width | 22.10mm |
| Depth | 80.26mm |
| Weight | 7.94g |
| Sūtījuma svars | 0.08 kg |
| Sūtījuma izmēri | 175 × 102 × 25 mm |
Citas šī modeļa versijas
Vēl 1 šajā sērijā
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Jautājumi par šo preci
How can I verify the drive reaches its 3500 MBps sequential read and 2300 MBps sequential write after installation?
Run a benchmark such as CrystalDiskMark using the NVMe 1.3 PCIe Gen3 x4 interface; the results should approach the rated 3500 MBps read and 2300 MBps write figures.
What is included in the box and what extra items are required to install this M.2 2280 SSD?
The package contains the 970 PRO 512GB drive only; you must supply a compatible M.2 slot with PCIe Gen3 x4 wiring and a motherboard standoff screw.
Which capacity of the 970 PRO series should I choose for a workload needing 600 TBW endurance?
The 512GB model provides the full 600 TBW rating, so select this capacity when that endurance level is required.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
