SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
SAMSUNG
A 1 TB, 7200 RPM desktop hard drive with 32 MB cache and a SATA 3.0 Gb/s interface
The Samsung Spinpoint F3 HD103SJ provides 1TB of storage on a 3.5in form factor with a SATA 3.0Gb/s interface. It spins at 7200 RPM and includes 32MB cache for everyday desktop workloads. The drive measures 146mm long, 101.6mm wide and 25.4mm high. It is suited to users who need a basic mechanical drive for daily computing.
Operating at 7200 RPM, the drive generates typical mechanical-drive heat and audible seek noise during normal desktop use. Average seek time is 8.9ms, reflecting standard platter latency. Power draw follows conventional 3.5in SATA patterns without special low-power modes mentioned. No acoustic or thermal specifications beyond the seek figure are supplied.
Under continuous read or write activity the 7200 RPM spindle and 32MB cache maintain steady throughput limited by the SATA 3.0Gb/s link. The 8.9ms average seek time remains the primary latency factor during prolonged random access. No thermal throttling behaviour or sustained-transfer ratings are provided in the data. Buyers who need higher sustained bandwidth or lower latency should consider alternative storage technologies.
| Brand | SAMSUNG |
|---|---|
| Model | HD103SJ |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Cache | 32MB |
| Average Seek Time | 8.9ms |
| Usage | For Daily Computing |
| Form Factor | 3.5" |
| Height (maximum) | 25.4mm |
| Width (maximum) | 101.6mm |
| Length (maximum) | 146mm |
Mount the drive using 3.5in bays with 25.4mm height clearance, connect the SATA 3.0Gb/s data cable and power connector, then initialise the 1TB volume in the OS — skipping initialisation leaves the drive invisible.
Mechanical wear on the 7200 RPM spindle and actuator means the drive will eventually need replacement; monitor SMART reallocated-sector counts and keep airflow across the 146mm length to delay failure.
The SATA 3.0Gb/s link saturates before the 32MB cache or 8.9ms seek time becomes the bottleneck, capping continuous read or write speeds at the interface maximum.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?