Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact rectangular black SSD with orange carabiner loop

SanDisk

SanDisk SDSSDE81C-1T00-G25 1TB portable SSD

SKU CH-J4PT-Q6ZGW MPN SDSSDE81C-1T00-G25

1TB portable NVMe SSD with up to 2000MB/s read and write speeds via USB 3.2 Gen 2x2, IP65 dust and water resistance, and 3.0m drop protection

Capacity 1TB

  • Read and write up to 2000 MB/s via USB 3.2 Gen 2x2 for rapid project access
  • 1 TB capacity stores extensive high-resolution media libraries and project files
  • Drop-resistant to 9.8 ft (3.0 m) and IP65 rated for dust and water protection
  • Compact 4.36 x 2.28 x 0.41 in design weighs only 2.71 oz for easy carry
  • Carabiner loop included for secure attachment during on-the-go workflows

Built for creative workflows

The SanDisk Creator Series Pro 1TB portable SSD targets photographers, videographers and editors who need fast, rugged external storage for large project files. Its NVMe drive delivers up to 2000MB/s read and write over USB 3.2 Gen 2x2. The IP65 rating and 9.8ft drop protection suit field work.

Sustained transfer behaviour

The drive maintains high throughput while moving uncompressed footage, multi-camera timelines or AI-generated assets across the full 1TB capacity. Thermal design supports consistent speeds during long ingest or backup sessions rather than only short bursts. The carabiner loop keeps the device secured during mobile use.

USB 3.2 Gen 2x2 practical limits

Peak 2000MB/s performance requires a host port that supports USB 3.2 Gen 2x2; older USB 3.2 Gen 2 or USB 3.0 ports will cap transfer rates below the drive's maximum. The Type-C connector is the physical interface, but the controller and cable must also handle the 20Gbps lane.

Priekšrocības

  • Read and write up to 2000 MB/s via USB 3.2 Gen 2x2 for rapid project access
  • 1 TB capacity stores extensive high-resolution media libraries and project files
  • Drop-resistant to 9.8 ft (3.0 m) and IP65 rated for dust and water protection
  • Compact 4.36 x 2.28 x 0.41 in design weighs only 2.71 oz for easy carry
  • Carabiner loop included for secure attachment during on-the-go workflows

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Citas šī modeļa versijas

Vēl 2 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How hot or noisy does the 2000MB/s NVMe drive get during all-day transfers?

The SSD has no moving parts, so it runs silently and produces only modest warmth even under sustained read and write loads.

Which port and cable must my computer already have to reach the advertised 2000MB/s speed?

A USB 3.2 Gen 2x2 Type-C port and a compatible cable are required; slower ports will work but limit throughput.

Will the IP65-rated 3.0m drop-proof enclosure work reliably with a five-year-old laptop that only has USB 3.0 ports?

Yes, the drive is backward compatible and will operate at the host’s maximum USB 3.0 speed while keeping its rugged protection.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.